2.7 Sensor Operation and Management

Question 1

Radar/IFF alignment delta nearing threshold

Answer 1

AZ ERROR HIGH

Question 2

Radar/IFF alignment delta exceeds threshold

Answer 2

AZ ERROR LIMIT

Question 3

Number of IFF beam split reports exceeds high threshold (70%)

Answer 3

IFF BEAM SPLIT HIGH

Question 4

Number of IFF beam split reports exceeds error limit threshold (90%)

Answer 4

IFF BEAM SPLIT LIMIT

Question 5

Rotodome rotation rate exceeds threshold

Answer 5

ROTODOME RPS <status></status>

Question 6

The Pulse Doppler RADAR in _________ mode will not transmit pulses but will receive and process pulses and environmental signals

Answer 6

PSV

Question 7

The optimum commanded angle for the PD RADAR is a lont stant mode is __________

Answer 7

-.7

Question 8

The optimum commanded angle for the BTH RADAR is __________

Answer 8

-2.1

Question 9

T/F: The blanking field sets a minimum amplitude that low velocity targets must exceed in order to be displayed

Answer 9

False

Question 10

T/F: Changing RADAR frequencies between sectors (i.e., sectoring frequencies) is encouraged

Answer 10

False

Question 11

T/F: Detection occurs when the signal strength is greater than the CFAR detection threshold assigned by the operator

Answer 11

True

Question 12

T/F: Reducing the Minimum Velocity (MV) value to decrease detection capability for low-velocity targets will also increase background Pulse Doppler clutter

Answer 12

False

Question 13

During _________, do no transmit on mission identification systems during contact

Answer 13

AR

Question 14

The system generates what alert for out-of-tolerance rotodome speeds?

Answer 14

ROTODOME RPM