AHN Flashcards by lydia matthews

What are the VNAV FSD scales?

ENR: Lateral Linear 2NM

TERM: Lateral Linear 1NM, Vertical 500’

APPR: Lateral Linear 0.3NM, vertical 250’

How well did you know this?

Not at all

Perfectly

What are the vertical tracking tolerances for 3D approaches on the FMS?

In approach mode:

Full scale 250’
Half scale 125’

Missed Approach Required at 75’

How well did you know this?

Not at all

Perfectly

Why do you need to apply power prior to taxiing?

A slight (3%) advancement in power is required to de-energise the ground idle solenoids.
The powers are to be returned to idle after.

How well did you know this?

Not at all

Perfectly

What altitude is yaw damper required above?

F190

How well did you know this?

Not at all

Perfectly

What are the flap load limits?

+2G/0G

How well did you know this?

Not at all

Perfectly

How close must the propeller RPMs be for the propeller sync to function correctly?

20RPM

How well did you know this?

Not at all

Perfectly

What effect does engine anti-ice have on engine parameters?

-5% to 10% TQ
+10°C ITT

How well did you know this?

Not at all

Perfectly

How thick should ice be on the wings before triggering anti - ice?

1/2” thick.

How well did you know this?

Not at all

Perfectly

After what crosswind level must a rolling takeoff be conducted?

20KTS

How well did you know this?

Not at all

Perfectly

When should a static takeoff occur?

When TORA is less than corrected TOFL + 1000’

How well did you know this?

Not at all

Perfectly

What is the distance between airfield runway edge lighting?

60 meters

How well did you know this?

Not at all

Perfectly

What is the max rate climb airspeed?

140KIAS

How well did you know this?

Not at all

Perfectly

What is the max angle climb rate?

125KIAS

How well did you know this?

Not at all

Perfectly

What is the max cabin differential?

6.6PSI

How well did you know this?

Not at all

Perfectly

What should the cabin ROC be?

500-700FPM

How well did you know this?

Not at all

Perfectly

At what ISA temperature should you plan to fly at lower levels due to climb performance?

ISA + 20C

How well did you know this?

Not at all

Perfectly

What is the best TAS altitude at NCP?

F240

How well did you know this?

Not at all

Perfectly

What is the minimum speed in icing?

140KIAS

How well did you know this?

Not at all

Perfectly

What cruise power should be set if not torque limited?

95%

How well did you know this?

Not at all

Perfectly

What is the standard descent profile?

240KIAS, 1500fpm, 3°,

How well did you know this?

Not at all

Perfectly

How many knots of headwind/tailwind will change your descent point by 1NM?

5KTS

How well did you know this?

Not at all

Perfectly

What is the fastest descent profile possible?

5000fpm, 240KIAS, 10% TQ, 1700RPM

How well did you know this?

Not at all

Perfectly

What is the minimum circuit speed?

VTHR + 10KIAS, for the current aircraft configuration

How well did you know this?

Not at all

Perfectly

What is the downwind spacing?

1.1NM

How well did you know this?

Not at all

Perfectly

What is the runway queue for a visual left circuit?

Runway centreline aligned with main fuel filler cap.

What is the runway queue for a visual right circuit?

Runway centreline aligned with top of right engine nacelle

When taking approach flap down-wind on a circuit, what should you do with the attitude?

Lower from 2NU to 2ND, then slowly revert to 0 as the aircraft decelerates.

What speed should you have at the base turn point?

130KIAS

On a left circuit, how do you know when you’re at the base turn point?

When the RWY threshold is 1.5 wing chords behind the wing trailing edge

What are the circuit wind corrections?

1/2 a chord length or 5 seconds for every 10 knot wind increment

When should an approach flap landing be conducted??

Cloud base below 1000ft Visibility less than 2kms

After what crosswind should reverse not be used?

20KTS

What is the landing gear duty cycle?

The 6th cycle will occur on downwind on the 6th circuit, after which time a 15 mins cooldown is required. Max continuous circuit limit is therefore 5.

What does the SYNC button on the yoke do?

Syncs the current FD to the current pitch and roll. Only possible if AP is off.

What are the climb parameters?

Speed: Profile Speed TQ: 95%/785C RPM: 1600 Attitude: 10-12NU

What are the level clean 200KTS parameters?

Speed: 200KTS TQ: 50% RPM: 1500 Attitude: 0NU

What are the level clean 170KIAS parameters?

Speed: 170KIAS TQ: 35-40% RPM: 1500 Attitude: 1NU

What are the flap approach, gear down parameters (Reversal Procedure)

Speed: 160KIAS TQ: 40% RPM: 1600RPM Attitude: 1NU

What are the flap approach, gear down parameters (Circling)

Speed: 140KIAS TQ: 40% RPM: 1600RPM Attitude: 1-2NU

What are the clean descent parameters (200KIAS)?

Speed: 200KIAS (1500RPM) TQ: 25-30% RPM: 1500RPM Attitude: 2-4ND

What are the clean descent parameters (240KIAS)?

Speed: 240KIAS (1500RPM) TQ: 50-70% RPM: 1500RPM Attitude: 3 - 5ND

What are the Flap App, Gear down descent parameters? (160KIAS)

Airspeed: 160KIAS (800fpm) TQ: 45% RPM: 1600RPM Attitude: 1-2ND

What are the Flap App, Gear down descent parameters? (160KIAS)

Airspeed: 140KIAS (800fpm) TQ: 25% RPM: 1600RPM Attitude: 1ND

What distance do you need to lead an arc with nil wind at 200KTS?

1.7NM

What speed is arcing conducted at?

200KIAS

What are the arcing descent parameters?

Config: CLEAN Speed: 200KIAS TQ: 25% RPM: 1500RPM Attitude: 1-2ND

For approaches with a lead radial, when should the aircraft be configured into the approach configuration?

By the LR

For a reversal procedure, when should the aircraft be configured into approach configuration?

Prior to going overhead

For a sector entry/hold, when should the aircraft be configured into approach configuration?

On the inbound of the last leg prior to commencing the approach

For teardrop/reversal procedures, when should the aircraft be configured into the final configuration?

When commencing descent outbound

What power and attitude do you initially set for a missed approach?

7NU, 90%TQ

At what distance does the FMS automatically tune a localiser frequency?

30NM

What RoD is required for a VOR approach?

700-800FPM

What speed is low flying conducted at?

180KIAS

What is the AoB limit for turns away from the PF for low flying?

45AoB

What is the separation of aircraft in RVSM airspace?

1000’

What airspace levels does RVSM apply to?

F290 - F410 inclusive

What is the minimum height to maintain V2 in VMC?

400’

What is the minimum height to maintain V2 in IMC?

Briefed Safety Altitude

What altitude can the KA350 operate single engine?

F220

What speed do you drift down?

VYSE (125KTS)

What height is decision height in an asymmetric circuit?

200’

What is the splay of a take-off area?

250’ plus 12.5% splay

What is the OCTG (Obstacle Clear Takeoff Gradient)

The OCTG is the greatest vertical angle with the horizon that subtends an obstacle within the surveyed area.

What is the obstacle clearance height for straight departures and turning departures?

35ft for straight 50ft for turning

Can you fly a visual departure at night?

When using a 10/25 mile MSA for performance calculation, what must you take away?

600ft.

What is 15,000M to Miles

8.1NM

When a destination airfield is only served by an RNAV, or an RNAV is being used to satisfy SAM requirements, what must be available at the arrival time?

RAIM fault detection and exclusion. If not, plan for an alternate or amend the times.

Oceanic Class A

When transiting oceanic class A airspace with RNP2 and RNP4, what is the maximum FDE unavailability time?

25 minutes

When transiting oceanic class A airspace with RNP10, what is the maximum FDE unavailability time?

34 minutes.

When flying continental operations, how long after a GNSS loss of integrity do you have before you notify ATC?

5 minutes.

AHN Flashcards

(76 cards)