AMG

Question 1

1. What are the area dimensions required to perform MO&E for the AMG?

Answer 1

D 10 * 10

Question 2

2. Which CM(s) receive(s) the confirmation for march order?

Answer 2

D all CMs

Question 3

3. What is the width of the brush guards when in the down position on both sides?A

Answer 3

18 feet

Question 4

4. Which crew member connects the ground cable?

Answer 4

CM 1

Question 5

5. How long does the unit have to achieve their directed alert state?

Answer 5

60 minutes

Question 6

6. What device is used to obtain the AMG vehicle heading

Answer 6

Compass

Question 7

7. If the AMG is parked on a soft surface, the upper stabilizer strut should be aligned with the
   ​_________ mark on the height guide.

Answer 7

Soft soil

Question 8

8. When lowering mast a safety switch automatically stops mast from moving lower than ________ degrees?

Answer 8

10

Question 9

9. Patriot Fire units and Battalion headquarters and headquarters batteries must maintain a minimum _______ AMG crew(s).

Answer 9

B one

Question 10

10. Ground rods must be driven to a minimum depth of __________ to provide an effective ground.

Answer 10

D 9 feet

Question 11

11. The ground rod should be located no farther than _________ from AMG ground connector.

Answer 11

C 15 feet

Question 12

12. What is the max tolerance for level and cross-level for the AMG?

Answer 12

B 10 degrees cross roll & 1/2 degree roll

Question 13

13. When polarizing roadside and curbside antennas, how many quick release pins need to be removed for each antenna?

Answer 13

B 4

Question 14

14. How long does the AMG crew have to install guy wires?

Answer 14

D not timed

Question 15

15. Which crew member maneuvers the AMG truck to the designated position?

Answer 15

A cm 1

Question 16

16. Where should the operator stand when obtaining the vehicle heading?

Answer 16

A front of vehicle

Question 17

17. During high winds, AMG masts must be retracted when…

Answer 17

D all of the above

Question 18

18. How does the AMG masts extended in the vertical position?

Answer 18

B automatically

Question 19

19. How are the AMG masts elevated to vertical position?

Answer 19

C hydraulicly

Question 20

20. If the AMG is emplaced on a hard surface, the upper stabilizer strut should be aligned with the _________ mark on the height guide.

Answer 20

A hard soil

Question 21

‘21. Prior to elevating the priority mast, what should be connected?

Answer 21

B guy wires

Question 22

22. How long does the unit have to emplace the system and rejoin the air battle?

Answer 22

A 45 minutes

Question 23

23. Which crew member determines AMG heading?

Answer 23

B cm 2

Question 24

24. At what PSI does the air compressor shut off at?

Answer 24

A 90-95 psi

Question 25

25. The AMG should not be parked on grades exceeding what percent?

Answer 25

A 10

Question 26

26. What is the width of the stabilizer struts when fully extended to both sides?

Answer 26

B 16 feet

Question 27

27. What position must operators ensure mast extension switch is set to after mast is fully retracted to avoid ​draining the battery.

Answer 27

C pause

Question 28

28. How many personnel are required for the guy wire installation?

Answer 28

B 3

Question 29

29. Where are the AMG controls and indicators for mast warning lights and fault lamps located?

Answer 29

C distribution box

Question 30

30. What generator trailer model is towed by the AMG?

Answer 30

C PU-804

Question 31

31. What is the reference designator for the AMG truck mounted?

Answer 31

D 7

Question 32

32. At what PSI does the AIR PRESSURE indicator light illuminate?

Answer 32

B 80-85 psi

Question 33

33. What PSI should the regulator pressure gauge be set to?

Answer 33

A 35

Question 34

34. What is the approximate maximum height of the AMG masts?

Answer 34

A 81 feet

Question 35

35. How many antenna assemblies are on each of the telescoping masts of the AMG?

Answer 35

A 2

Question 36

36. When emplacing the AMG, the operator must position truck so there are no overhead obstructions, ​especially power lines. Mast shall only be raised at a ​horizontal distance of more than twice the maximum ​height of the mast from power lines.

Answer 36

A-true

Question 37

37. Before lowering the first mast, you must ensure that the other mast is one section higher than base.

Answer 37

A-true

Question 38

38. If freezing temperatures are expected, purge any water that may have collected inside the mast from rain or condensation by extending and retracting the mast several times.

Answer 38

A-true

Question 39

39. Mast group is cross leveled when the ball is centered in the green portion of the inclinometer.

Answer 39

A true

Question 40

40. Both mast can be raised and lowered at the same time.

Answer 40

B false

Question 41

41. What is BII?

Answer 41

BASIC ISSUE ITEMS

Question 42

42. What is UHF?

Answer 42

ULTRA- HIGH FREQUENCY

Question 43

43. In the ECS, what is used to monitor mast deflection (sway) and operational status of the AMG amplifiers?

Answer 43

ANTENNA MONITOR MAST PANEL

Question 44

44. What does PMCS stand for?

Answer 44

PREVENTITIVE MAINTENANCE CHECKS AND SERVICES

Question 45

45. What does AMG stand for?

Answer 45

ANTENNA MAST GROUP

Question 46

46. How many fire extinguishers are required for the AMG?

Answer 46

3

Question 47

47. Describe the 3 classes of leaks.

Answer 47

CL 1 WETNESS FORMS CL 2 DROP FORMS BUT NO DRIP CL 3 DROP DRIPS

Question 48

48. What is COEI?

Answer 48

COMPONENT OF END ITEM

Question 49

49. What gunnery table and technical manual cover PMCS for the AMG?

Answer 49

TM 11-5985-368-12P TABLE 1 SUBTASK 11

Question 50

50. What are the 3 types of PMCS that must be performed with each movement?

Answer 50

BEFORE DURING AFTER