1
Q
OVERHEAD BREAK
A
- ´R/T - BDXX, Initial, Left/Right (Stop)´
- Wind - Crab
- Lookout - up left/right (PFL TFC)
- End of RWY - Break
A) 60/2, PCL - Idle, 5sec Trim - 3/4 turn - PCL spool up
- Roll out - Spacing,Tk, Tq adjust for 140kts
- X< 147kt - configure
- Lookout - extended RWY center line
- Trim for 120 kts
- Perch - flaps land, N down, 45AOB, PCL 20%
- 1/4 turn - R/T ´BDXX, 3 Green, Go(Stop) left’
- 1/2 Turn - ALT 2600ft
- [+] - 120 trim, N up for 120
- Aim point - Airspeed - Trim
2
Q
Fly through
A
1.Continue End of RWY
2. End of RWY - Turn Crosswind
3. Lookout- TFC Downwind
4. Turn - Downwind
3
Q
Low Approach Left/Right, Right/ In between
A
- Maintain RWY center line
- Alt - 2100ft
- Speed 120 - Tr 35% or 55%
- Go Around
4
Q
closed pattern
A
- Clean up
- R/T –
BDXX, Closed left - Lookout, 140kts, End of Rwy
a. Pull 10° N↑ UP, 45/2, Max 90° - 2700ft – PCL 20% tr
a. Let nose drop - 3000ft intercept - 3000ft – Freeze 60/2
- Anticipate Roll out
- Roll out – Spacing, Tk, Tq 20%
Downwind
1. Circuit Check – Fuel, HYD Press, T’s & P’s
a. R/T – ´BDXX, Downwind (Stop)´
2. < 147 kts – Configure
3. Pre-Landing Check
4. Trim - 120 kts, 35% torque
5. Lookout – Downwind killer
6. Perch – Flap land, N↓, 30°-45° AOB, PCL 20%
7. R/T – ´BDXX, 3 green, Go left´
8. Halfway – 2600ft MSL
9. Window – 20%, 120kts, 2200ft
10. Airspeed – Aim point (Cycle)
