Chapter 12, Sections C

Question 1

1. Avionics equipment requires good ____ ____ connections for proper operation

Answer 1

Bonding Jumper

Question 2

2. Avionics equipment ___ (is or is not) easily damaged by heat

Answer 2

Is

Question 3

3. Wiring should be routed ___ structure lines that carry fluids and ___ securely to the aircraft

Answer 3

Above
Clamped

Question 4

4. Avionics equipment should be turned off during engine starting and shutdown to prevent damage from ___ currents and voltage ___

Answer 4

Surge
Spikes

Question 5

5. Aircraft switches must be of the ___- ___ type.

Answer 5

Snap-action

Question 6

6. Aircraft circuit breakers must be of the ___ - ___ type.

Answer 6

Trip-free

Question 7

7. Bonding jumpers should have an electrical resistance of no more than ___ ohms.

Answer 7

0.003

Question 8

8 The component of an avionics system that captures electromagnetic interference generated by an ignition system and sends it to ground is called ___.

Answer 8

Shielding

Question 9

9. Static ___ also called static ___ are usually located on the ___ edges of primary control surfaces and discharge static electricity to the ___

Answer 9

Discharges
Wicks
Trailing
Atmosphere

Question 10

10 ___ (what type) antenna cable is constructed of a center conductor surrounded by a dielectric, which is surrounded by a shield or outer conductor and that is surrounded by an outer protective insulator.

Answer 10

Co-axial

Question 11

11. Antenna cables should be replaced if they are ___, ___,
    ___ ,or have ___ wire braid.

Answer 11

Dented
Kinked
Distorted
Crushed
Exposed