Types of Building Construction
Type 1- Fire-resistive Type 2- Noncombustible or limited combustible Type 3- Ordinary Type 4- Heavy Timber Type 5- Wood Frame
Type 1
Fire Resistive
Provides structural integrity during a fire
Type 2
Noncombustible or limited combustible
Similar to type 1. Degree of fire resistance is lower.
Type 3
Ordinary
-Exterior walls & structural members constructed of noncombustible or limited combustible materials.
Type 4
Heavy Timber
- Exterior & Interior walls & their associated structural members made of noncombustible or limited combustible materials.
-Other Interior structural members, including, Beams, Columns, Arches, Floors & Roofs, are made of solid or laminated wood with no concealed spaces.
(Old factories, Mills, Warehouses, Churches)
*Primary Hazard= Massive amounts of combustible contents, Tremendous amounts of Heat & Exposure protection problems.
Type 5
Wood Frame
-Exterior walls, bearing walls, floors, roofs & supports made completely or partially of wood or other approved materials.
-FF must be alert for fire coming from doors & windows extending to the exterior of the structure.
Load Bearing Wall
Walls that take loads (Party walls)
Most exterior walls are load bearing walls
Party Wall
A load bearing wall that supports two adjacent structures.
Partition Wall
Divides two areas within a structure and is a non-load bearing wall
Wood
Reaction of wood to fire conditions depends on two factors
Masonry
Bricks, Stones, Concrete ( Minimally affected by fire & Exposure to high temps)
Cantilever Wall
Free standing fire walls commonly found on large churches & shopping centers
Block Wall
May be load-bearing walls
Most Brick and stones walls are Veneer walls
Veneer Wall
Decorative & usually attached to the outside of some type of load-bearing frame structure.
Bricks
Stones
Blocks
Cast Iron
Rarely used in modern construction
*Primary Concern is stand pipe bolts or other connections can fail
Steel
Primary material used for structural supports in modern buildings.
Reinforced Concrete
Internally fortified with steel reinforcement bars or mesh.
Gypsum
Inorganic product from which Plaster & Plasterboards are made
Glass/Fiberglass
- Typically used for insulation purposes
Two primary types of dangerous conditions that may be posed by a particular building
Fire Load
Maximum heat that can be produced if all the combustible materials in a given area burn.
Heavy Fire Loading
Large amounts of combustible materials in an area of a building.
Collapse zone
One and a half times the height of the building