What are the three problems encountered in System Theory?
What is system identification?
System identification is the determination, on the basis of observation of input and output, of a system within a specified class of systems to which the system under test is equivalent.
What are the must haves of data gathering for system identification?
What are the types of sensors / measurements for an Aircraft? (6)
What are three important inertial sensors?
What is the difference between integrating and non-integrating sensors?
Non-Integrating sensors measure rates,
Integrating sensors measure increments
Where should accelerometers be installed?
Near the center of gravity
What are the components of a mechanical accelerometer? How does it work?
Measures acceleration by measuring deflection of proof mass from initial position while also accounting for gravitational force
What are the three main types of gyroscopes and what physical effect do they use?
What are the advantages and disadvantages of spinning mass gyros?
Advantages:
- Wide performance range of 0.0001 to >100 degree /h
Disadvantages:
- High cost
- Long warmup
- Fragile
What are the advantages and disadvantages of RLG/FOG gyros?
Advantages:
- Rapid reaction and turn on <1s
Disadvantages:
- Performance increases with size
What are the advantages and disadvantages of MEMS gyros?
Advantages:
- Small
- No moving parts
- Low cost
Disadvantages:
- Higher precision to be developed
What are the Air Data systems and what info do they provide?
What are pitot static probes?
How are pilot forces meausred?
Strain gauges on control rods
What are the three types of Sensor errors?
What is hysteresis error?
Different output for increasing and decreasing input
What is Bias instability?
Random medium to long-term bias variation
What is dead band error?
Small area around null where input is not detected
What is resolution / quantization error?
Minimum measurable input/floating point representation
What is turn on bias?
Variation of scale factor and bias from day-to-day
What are the error sources for GNSS? (6)
What does the integration of errors produce?
Large deviations
What are some values used in linear regression and what do they mean? (7)