1: What is the construction classification for ordinary construction? A: Type I B: Type II C: Type III D: Type IV
C: Type III
2: What is another name for the void space found between the top-floor ceiling and the roof? A: Attic B: Cockloft C: Garret D: Loft
B: Cockloft
3: What is the general rule with regard to fire separation within ordinary construction buildings?
A: They have a one-hour rating.
B: They have a two-hour rating.
C: They have a three-hour rating.
D: No rating is effective in such circumstances.
D: No rating is effective in such circumstances.
4: How many stories is the tallest old-style masonry-bearing wall building in the United States? A: 5 B: 10 C: 15 D: 20
C: 15
5: In some codes, concrete topping was required over first-floor wood floors for fire resistance or to provide a sanitary floor. Which type of additional load does this place on the building? A: Lateral B: Live C: Dead D: Impact
C: Dead
6: In composite walls, uneven settlement between the brick and the block might create what effect?
A: Uneven distribution of the exterior walls
B: Masonry walls pulling from the main supports
C: Deterioration of the stretcher course
D: Cracking of the header bricks
D: Cracking of the header bricks
7: Why is it difficult to get floor beams level in masonry buildings?
A: Because of the irregularities of the masonry
B: Because the trade of laying the masonry is not being taught correctly
C: Because of the constant wind loads
D: Because of the possible lateral impact loads
A: Because of the irregularities of the masonry
8: The best roof is one in which the roof beams rest on? A: Outside bearing walls B: Outside non-bearing walls C: Spandrels D: Girders
D: Girders
9: Why are false ceilings commonly added to buildings?
A: To limit the fire protection area
B: To conserve heating and cooling costs
C: To reduce the size of the interior
D: To assist with fire containment
B: To conserve heating and cooling costs
10: Which type of space contains many square feet of exposed fuel and is protected from hose streams by their construction? A: Ceiling spaces B: Interior sheathing C: Joist spaces D: Cornices
C: Joist spaces
Void space between the top ceiling and the roof
Connects the girders and imparts some lateral stability under normal conditions
Stone cut in rectangular units
Bricks laid so the end is visible
Large, roughly molded, sun-dried clay units of varying sizes
A low-ceiling story located between two main stories
Square metal device used to transfer loads of columns on upper floors by passing the loads through intervening beams and girders
A horizontal line of masonry
Application of mortar to the back of facing material
Large or principal beam of wood or steel used to support concentrated loads
MULTIPLE CHOICE
The chief common characteristic of ordinary construction is:
A. the exterior walls are made of brick veneer
B. the exterior walls are made of masonry load-bearing walls
C. the floors are made of concrete
D. The buildings do not contain brick or wood joists
B. the exterior walls are made of masonry load-bearing walls
MULTIPLE CHOICE Which wall separates two buildings and is meant to stop a fire? A. Fire partition B. Fire wall C. Fire barrier D. Bearing wall
B. Fire wall
MULTIPLE CHOICE What type of connections must be made whenever an opening is made in a wooden floor? A. Wall to beam B. Floor to beam C. Beam to beam D. Beam to column
C. Beam to beam
MULTIPLE CHOICE Where a column is offset, the girder on which it rests is called a/an: A. transfer beam B. pintle C. offset beam D. axial beam
A. transfer beam