Blueprint
Architectural drawings that describe the layout and construction of a house.
Specifications
A document provided by Architects that describe the quality of construction.
Septic system
A small-scale sewage treatment system common in areas with no connection to main sewage pipes provided by local governments or private corporations.
Percolation rate
The rate, usually expressed as inches per hour or inches per day, at which water moves through soil.
Slab on grade construction
A structure which does not include a basement. The first floor is made up of a concrete slab, which lays on the ground and supported by foundation walls.
Crawl space
Shallow space between the underside of the first floor of a house and the ground.
Sill plate
The bottom member of wood frame stud wall.
Beam
A horizontal structural member that supports a floor. Beams are typically wood, cold formed metal framing or steel.
Joists
Horizontal timbers, beams or bars supporting a floor.
Studs
Vertical framing members found in wall construction. Typically placed 12”, 16” or 24” on center.
Girder
A primary horizontal structural element. Typically a deep beam in which smaller joists or beams frame into.
Rafter
The structural member or beam that supports the roof. It spans from the exterior wall to the ridge board of the peak of the roof.
Pitch
Also known as the slope. Typically used in describing the slope of a roof, driveway, sidewalk, etc.
Sheathing
Panels that cover the exterior wall. Typically made of plywood or exterior grade gypsum board.
Flashing
Sheet metal used at wall and roof junctions and around chimneys to prevent water entry.
Fascia
Architectural term for a band running horizontally and situated vertically under a roof edge, or which forms the outer surface of a cornice, visible to an observer. Typically consisting of a wooden board or sheet metal
Eave
The section of the roof that overhangs the walls of a house.
Soffit
The underside of a roof overhang.
Bearing walls
Structural walls that transfer building loads down to the foundation. Joists, beams, and roofs are typically supported by bearing walls
Headers
Local horizontal structural elements used in wood framing to span doors and windows.
Soffit
The underside of a roof overhang.
R value
A measurement of the ability of insulation to slow the transfer of heat or cold. The higher the R value, the greater the insulation power.
Building envelope
Refers to the massing or bulk of a building. Typically defined by the exterior walls of a building.
British thermal unit
The amount of heat energy needed to raise the temperature of one pound of water by one degree F. This is the standard measurement used to state the amount of energy that a fuel has as well as the amount of output of any heat generating device.