DCAT Test

Question 1

Start the compressor and allow it to run with air flowing from the sampling point for at least________ before performing air sample test

Answer 1

15 minutes

Question 3

Slowly open the compressor charging lead or air source valve until a steady pressure in the range of________ is established on the Flow Section Pressure Gauge

Answer 3

4-6 psi

Question 4

DCAT pressures and corresponding test times
4 psi for____ minutes 5 psi for____ minutes 6 psi for___ minutes

Answer 4

14

12

10

Question 5

Begin timing the test as soon as_____________(DCAT)

Answer 5

the moisture stain tube is in place

Question 6

What color does the moisture tube become during DCAT test?

Answer 6

Reddish brown

Question 7

ALL______ BLANKS MUST BE COMPLETED _______ DATA PROVIDES FLOW TIME REQUIREMENTS________ INFORMATION PROVIDES IMPORTANT WARNINGS

Answer 7

YELLOW

GREEN

ORANGE

Question 8

3.2.1.3The contractor shall be responsible ior updating the DCAT website with analytical reports twice daily at______ and NLT ________.(DCAT)

Answer 8

noon

I80O CST

Question 9

Ifthe website goes ofline, the contractor shal have theabilityto restore the website to online service within______.(DCAT)

Answer 9

24 hours

Question 10

The contractor has_________ upon receiving kits to complete the analysis. Once the analysis is complete the report wil be downloaded to the DCAT website by________.

Answer 10

two (2) working days

noon of the second day