Originating Flow (FO) 10 items
- Airworthiness Acceptance
- Display Controller Unit
- Glare shield lights
- ADS probe heat
- Reversionary Panel
- PFD
- MFD
- Audio Panel
- O2 and interphone
- Alt Gear Extension
What are the PF TASKs Before Start to the Line?
- Enter Flight ID
- Enter route
- Enter transponder code
- PEREF INIT
- Set DEP/ARR airspeeds
- Set Guidance Panel
(Speeds - FMS, Autopilot side, altitude, course, source) - Set Auto Brake RTO
- Setup EFB
- WANT Briefing
What are the PM TASKs for Before Start to the Line?
- Initialize
- Obtain Clearance
- Verify Route
- Verify GP
- Setup EFB
- Set COM frequencies
What is the FO’s Before Start to the Line FLOW?
3 items
Complete when able
- Crew O2 (mask and quantity)
- PFD (set, no flags)
- MFD (set, status page)
What are the FO’s Before Start Below the Line TASKs?
Begins when FA brings PIN and CLR
- Complete manifest
- Read T/O data to captain
- Set pitch trim for takeoff
- Verify departure speeds and altitudes
What is the FO’s Before Start Below the Line FLOW?
5 items
Complete when able
- Seatbelts / Shoulder Harness
- Beacon
- Hydraulic Pump 3A
- Doors / Windows
- Transponder
What is the FO’s After Start FLOW?
5 items
CA: “FLAPS _____, APU ______, FLIGHT CONTROL CHECK”
FO: “FLAPS ____, APU”
- Flaps
- Transponder
- APU
- ADS Probe Heat
- Watch CA check flight controls
1st
What is the FO’s Before Takeoff FLOW?
5 items
CA: “BEFORE TAKEOFF CHECKLIST” FO: “ROGER”
- Cabin (Announcement/ verified FA secure)
- Takeoff data / FMS NAV
- Brake temps
- MFD map page
- Takeoff Config
What is the Climb Sequence, After Takeoff Checklist for the PF?
At 1,000 AGL
PF “CLIMB SEQUENCE, AFTER TAKEOFF CHECKLIST”
What is the Climb Sequence, After Takeoff Checklist for the PM?
PF: “CLIMB SEQUENCE, AFTER TAKEOFF CHECKLIST”
- Retract flaps on schedule
- When flaps are at zero
“AFTER TAKEOFF CHECKLIST COMPLETE” - Select CLB 1
What is the 10,000 MSL PF callouts?
PF: “TEN THOUSAND”
What is the 10,000 MSL PM FLOW?
3 Items
PF: “TEN THOUSAND”
- External Lights
- Sterile Light
- FSTN BELTS light per CA
Backwards L
What is the 18,000 action?
Set Baro to STD
What is the TOC procedure?
Check fuel imbalance
Compare fuel onboard with ACARS and Release
What are the PF TASKs prior to descent?
- Build
Load STAR/APP/RWY
Verify APP/Landing speeds
2.Bug
Minimums
Frequency
Course
- Brief
EFB
WANT - Brakes
What are the PM TASKs prior to descent?
- Weather
- PAX (brief / signs)
- MCDU
Determine landing weight / distance / speeds - Bug
Minimums
Frequency
Course - Call Company
What is the PF Descent Flow?
3 Items
FL180 (Transition altitude)
- “DESCENT CHECKLIST”
- BARO
- Belts
What is the PM Descent Flow?
4 items
PF: “Descent Checklist”
1. Bulbs Sterile Light External Lights (All ON) 2. BARO 3. Belts 4. Descent Checklist
What is the FO’s Shutdown Flow?
1. Item
- Transponder
