What would cause a CONFIG indication on the FUEL QUANTITY display?
More than 1600 lbs of fuel in the center tank and the Center Tank pumps are OFF.
What would cause this indication?
Fuel Imbalance is greater than 1000lbs for 60 seconds.
What would cause this indication?
Tank quantity lower than 2000lbs for more than 30 seconds.
When does a INSUFFICIENT FUEL annunciation display?
Less than 2000 lbs is predicted at the destination.
What is the normal fuel rate per hour approximately?
6000#
100# per minute
How many miles per minute?
5
Should AC power fail the center tank fuel pumps are rendered inoperable. Is fuel from the center and main tanks still usable?
Center - No the fuel in the center tanks cannot be used.
Main - Yes, the main tanks can be vacuum fed.
Note; this is why the process is to use center fuel first.
The USING RESERVE FUEL message is displayed on the scratchpad when? Is it different for the NG/MAX?
Fuel at destination is projected to be less than the RESERVES fuel on the PERF INIT page.
The MAX displays both below the fuel display and the scratchpad.
An INSUFFICIENT FUEL message appears when?
Less than 2000 lbs of fuel is predicted to be present at the destination.
NG: Scratchpad only
MAX: Below fuel display and scratchpad
A FUEL DISAGREE, only available on the MAX, displays when?
FMC determines a difference between calculated and totalizer values for more than 5 continuous minutes.
A FUEL FLOW indication means? MAX ONLY
A difference between actual and FMC expected fuel rates exceed the threshold for 5 continuous minutes.
EXTRA INFO: if any fuel remains in the center tanks after the center fuel pumps are turned off, the residual fuel will be moved to the number 1 tank by a scavenge pump after the No.1 Main tank is at less than 4500lb qty.