Gait Analysis

Question 1

Define Kinetic gait analysis and kinematic gait analysis

Answer 1

• Kinetic gait analysis: Study of forces generated during movement
• Kinematic gait analysis: The study of motion irespective of masses or forces

Question 2

Which gait are symmetric and asymmetric?

Answer 2

• Symmetrical: walk, trot, pace
• Asymmetrical: Canter, transverse gallop, rotary gallop

Question 3

What are the 2 main phases of the gait cycle?

Answer 3

• Stance phase
• Swing phase

Question 4

What is the ground reaction force?

Answer 4

The resultant force of all local forces acting on the foot/paw

Question 5

What are the 9 quantites calculated for each foot fall on a force plate?
Which are most commonly used for analysis in dogs?

Answer 5

Three orthogonal components
- Fx, Fy, Fz - describes the direction of the force

Three spatial components
- x, y, z - describes the location of the force on the plate

Three orthogonal moments
- Mx, My, Mz

The direction of force is most commonly described, Fx (mediolateral), Fy (craniocaudal), Fz (vertical) with the vertical force Fz being most common

Question 6

How do you calculate weight?

Answer 6

Weight = mass(kg) x acceleration of gravity on earth (9.81m/s^2)

Question 7

What do the vertical force Fz and the craniocaudal force Fy represent?

Answer 7

Fz represents the vertical force of the leg and can be used to assed peak vertical force. Creates a bell chaped curve at a trot, M-shaped at a walk

Fy represents braking (positive value) and propulsion (negative value)

Question 8

What is the impulse value?

Answer 8

The area under the forse-time curve and takes both force, and contact time into consideration

Question 9

What change is expected regarding peak vertical force and impulse value with pain or lameness?

Answer 9

Both are reduced

Question 10

What is represented by the rising and falling slope of a force-time curve?
What changes are expected with pain/lameness

Answer 10

• Rising slope depicts the loading rate of the limb and falling slope depects the offloading rate of a limb.

Pain/lameness:
- RIsing slope is reduced (less steep, slower to lad limb)
- Falling slope is increased (more steep, fast offloading)

Question 11

What number of photocells are required to measure velocity and acceleration?

Answer 11

• Velocity - at least 2 photocells
• Acceleration - At least three photocells

Placed 0.5m above gait platform, 0.5 - 3m apart

Question 12

How do you calculate velocity?

Answer 12

Distance traveled (m) / time (change in time) in seconds

Question 13

How do you calculate acceleration?

Answer 13

Change in velocity (m/s) /time (s)

Question 14

What are some of the main differences of pressure walkways as appossed to force plate?

Answer 14

• Force plates calculate a direct foce in three directions whereas pressure walkway only calculates pressure in a vertical direction
• Pressure walkways can record infor for each individual limb, force plate only does one limb at a time

Cannot compare one to the other

Question 15

During a trot, what is the average PVF of the thoracic limb and pelvic limb?

Answer 15

• Thoracic limb 115% BW
• Pelvic limb 72% BW

Question 16

Which gait is the more sensitive and accurate for the detection of low-grade or mild lameness in dogs?

Answer 16

Trot - no overlap of footfalls

Question 17

What is symmetry index?

Answer 17

The use of an animals own limbs to serve as an internal control for comparison

Question 18

What is a normal level of asymmetry?

Answer 18

Has been repored as less than 3.2 or less than 6%

Question 19

What are some common sources of variability?

Answer 19

• Handler
• Trial repetition
• Habituation
• Changes in velocity, stance time or acceleration/deceleration

Question 20

What are the three joint rotations and the three joint translations in kinematic analysis?

Answer 20

Rotations:
- Flexion and extension
- Internal and external rotation
- Abduction and adduction

Translations:
- Mediolateral
- Proximodistal “joint distraction”
- Craniocaudal “drawer”

Question 21

What is parallax error and perspective error?

Answer 21

• Parallax error: subject moves away from the optical axis of the camera
• Perspective error: WHen subject moves out of calibrated plane of motion

Question 22

What are the 2 forms of markers that can be used for kinematic analysis?

Answer 22

• Passive markers: Circular/spherical, non-reflective markers
• Active markers: Light-emitting diodes.

Question 23

What point values are commonly assessed using kinematic analysis?

Answer 23

• Range of motion
• Maximal flexion or extension

Question 24

List some forms of complete waveform analysis of kinematic analysis

Answer 24

• Fouriers analysis - can determine whether 2 gait cycles are similar. Deconstructs waveform into its component parts
• Wavelet analysis
• Generalised indicator function analysis - determines where in gait cycle the differences are occuring

Question 25

Define forward dynamics and inverse dynamics

Answer 25

- Forward dynamics: The process of usinf forces and moments to directly calculate the resulting motion of an object - Inverse dynamics: The use of available kinetic and kinematic data for the indirect calculation of forces and moments

Question 26

Define joint moment and joint power as it relates to dynamics

Answer 26

- Joint moment - net joint torque acting around a joint - Joint power - measure of mechanical energy generation and absorption across the joint

Question 27

What is parallax error and perspective error?

Answer 27

- Parallax error: subject moves away from the optical axis of the camera - Perspective error: WHen subject moves out of calibrated plane of motion