Principle of electronic impedance in cell counting. What is it based on?
*NOTE: Beckman vs Sysmex
“Number of voltage pulses” represents which hematologic parameter ?
Cell count
“Height of voltage pulses” represents which hematologic parameter ?
Cell volume
Define “co-incidence” in hematology
What is “aperture voting ?”
Describe RBC histograms
x- axis: cell size (fL)
y-axis: cell count
How is Hb value determined on Beckman Coulter ?
How is Flow Cytometry used to study cells ?
Forward light scatter: cell size
Side scatter: cell complexity/ granularity
VCS in Beckman Coulter analyzers
(V)olume: cell size
(C)onductivity: nuclear, granular, and chemical composition of cell interior
Light (S)catter: flow cytometry correlates forward and side scatter
Which WBCs are included in the 6-part differential on the Sysmex ?
How do Sysmex analyzers differentiate WBCs ?
Significance of increased retic count
Anemia due to red blood cells being destroyed earlier than normal (hemolytic anemia)
How do Beckman Coulter determine retic count ? What parameters are used and how are they measured ?
How do Sysmex analyzers determine retic count ? What parameters are used and how are they measured ?
What stain is used for manual retic counts ? What does this stain do to retics ?
New methylene blue; causes clumping and staining of residual nucleic acid present in immature cells.
MCV (fL)
HCT/RBC x 1000
WIP When would a manual retic count be indicated instead of an automated count ?
MCHC (g/L)
HGB/ HCT
MCH
HGB/ RBC
WBC estimate when 35 WBC /3 lpf and WBC field factor = 4
2.9 x10^9/L
Formula: WBC estimate (x10^9/L)
total WBC / 10 lpf / 4
NOTE: take average of (10) fields at low power, divide by 4 (field factor)
PLT estimate when 260 PLT /10 hpf and PLT field factor = 14
364 x10^9/L
NOTE: take average of (10) fields at hpf, multiply by 14 (field factor)
What is measured using electrical impedance in the 2-20fL range ?
PLT count
What is calculated directly from the RBC histogram ?
RDW