Hydraulics Flashcards

(24 cards)

1
Q

If the primary hydraulic system fails, what is the effect, if any, on the flight control system?

A

Loss of the Flight Management Computer (FMC) and Backup Control System (BUCS) inputs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

Where are the primary hydraulic system dirty filter indicators located?

A

On the primary manifold

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

Which components/systems lose hydraulic power in the event the utility reservoir is low?

A
  1. Pylons
  2. AWS elevation actuator and azimuth drive motor
  3. Servos
  4. Tail wheel unlock actuator
  5. Ammo carrier
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

During preflight, the utility accumulator pressure gauge should indicate a minimum of ____psi prior to attempting an auxiliary power unit (APU) start

A

2600

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

During preflight, what pressure should the utility hydraulic return actuator gauge indicate?

A

55 psi

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

What is purpose of the hand pump?

A

Charge the utility hydraulic accumulator and fill the primary and utility hydraulic reservoirs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

What is the crew station indication when the tail wheel is unlocked?

A

UNLOCK indicator is illuminated

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

When is the hydraulic pressure displayed on the ENG page flight format?

A

When it is out of normal limits

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

What does the caution UTIL HYD BYP indicate?

A

Utility return system indicates a “dirty filter” impending bypass condition

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

What is the time limit for either hydraulic system operating in the transient (>3410 psi) range?

A

5 seconds

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

How much PSI does the three positions of the Rotor Brake have?

A
  1. Off-30
  2. Brk-337
  3. Lock- 3000
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How long will you have the control with emergency hydraulic power?

A

30-41 secs

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

What does the primary Hydraulic Pump do?

A

Draws low pressure fluid from the primary hydraulic reservoir and provides pressurized hydraulic fluid to the primary hydraulic manifold

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

What does the primary hydraulic manifold do?

A

Stores, Filters, Supplies, Routes, and regulates hydraulic fluid

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

What does the primary hydraulic system do?

A

Provides 3000 PSI of pressurized hydraulic fluid to the primary side of the flight control servoactuators

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

What does the primary hydraulic ground support equipment panel do?

A

For servicing the primary reservoir and bleeding the primary hydraulic system

17
Q

What does the utility hydraulic system do?

A

Provides hydraulic power to: (PUTAAA
-Utility side of flight control servoactuators
-Tailwheel lock actuator
-AWS Elevation Actuator
-AWS Azimuth Drive motor
-Ammo carrier drive motor
-Pylons

AND

Provides a source of stored, high-pressure hydraulic fluid for rotor brake operation, APU Starter Motor Operation, and Emergency Operation of the flight control servoactuators

18
Q

What does the utility hydraulic return accumulator do?

A

Dampens pressure spikes from the Gun turret

19
Q

What does the primary hydraulic manifold reservoir do?

A
  • Stores low-pressure hydraulic fluid
  • Pressurized to 31 plus or minus 3 psi by the IPAS
  • Prevents fluid foaming and pump cavitation
20
Q

What are the components of the primary hydraulic manifold reservoir?

A
  • Fluid level indicator
  • Piston assy
  • Air inlet check valve
  • Manual air bleed valve
21
Q

What are the components of the primary hydraulic manifold?

A
  • Low level switch
  • Low-pressure relief valve
  • Drain port
  • Pressure switch
  • Pressure filter
  • Return filter
  • Dirty-filter indicators
  • GSE check valve
  • GSE return isolation
  • Pressure transducer
  • High-pressure relief valve
22
Q

Where are the hydraulic pumps located?

A

Left and right aft drive pad of the main XMSN

23
Q

What are the components of the utility hydraulic reservoir?
(Proud Firefighters Always Make Anal Leaks Disappear)

A
  • Piston Assy
  • Fluid level indicator
  • Air inlet check valve
  • Manual air bleed valve
  • Air relief valve
  • Low-pressure relief valve
  • Drain port
24
Q

What are the components of the utility hydraulic manifold?
(Life Always Lets Pilots Prefer Pure Drinkable
Hydration Really Really Far Away After Observing Eagle Ass)

A
  • Low-level valve
  • Auxiliary isolation valve
  • Low-level switch
  • Pressure switch
  • Pressure transducer
  • Pressure filter
  • Dirty filter indicator
  • High-pressure relief valve
  • Return filter
  • Return dirty filter indicator
  • Filter bypass valve
  • Accumulator isolation inlet check valve
  • Accumulator isolation valve
  • Override solenoid valve
  • Emergency hydraulic pressure transducer
  • Apu starter return check valve