What are the terminating locations in the Metrol Controlled Area?
Flinders Street: All Platforms
Southern Cross: Platform 8A and Platforms 9-12
South Kensington
Macaulay Sidings/Main line
What terminating locations are covered outside the Metrol Controlled Area?
Burnley
Victoria Park
Clifton Hill
What are the stabling locations in the Metrol Controlled Area?
The stabling locations are Layby Sidings, North Melbourne Sidings, and Macaulay Sidings.
Stabling locations outside metro
Melbourne Yard and North Melbourne Wash,
Burnley A Siding,
Burley Stabling Sidings
Victoria Park Siding.
How to terminate at Victoria park
Down
1. Arrive platform 2
2. Push out beyond dwarf vpk 109 with CE in rear
3. Push back across points to platform 1
Up
1.arrive into platform 1
2. Change ends
3. Receive proceed on 104 with D
Siding specifics for Victoria park
Siding hood two six cars
MBR on mainline side
Access from platform 1 with S
Routing at Clifton hill
To Mernda = either platform, from p2 normal speed aspect
To hurtsbridge = either platform. P2 get medium speed aspect
Terminate at Clifton Hill
Arrive into either platform and change ends
What must Belgrave, Lilydale, and Alamein trains receive on the route indicator?
A BH (Box Hill) from platform 3 or 4.
Which platform can up trains from Camberwell access only from the Centre line?
Platform 2.
Which platforms can up trains from Camberwell access from the Up Line?
Platforms 1 and 2.
What must Glen Waverley trains receive on the route indicator?
A GW (Glen Waverley) from platform 3 or 4.
How can up Glen Waverley trains access the Burley Local line?
Through Platform 1 at Burnley.
Down terminate at burnley
- Arrive P3 or P4
- Shunt to burnley sidings with GE
- Redock P.1
If sidings are full
- Arrive p3/4
- With CE push out beyond 337 with BH
- Receive proceed to platform 2
Up terminate p2 burnley
- Arrive P2
- Change ends on Plato from
- Recieve a proceed on 366 to C line
If required to access down outside line to BH or GW
- Arrive P 2
- With CE push out behind 337
- Recieve proceed and go P4
Up terminate p1 burnley
- Arrive p1
- With Ce push out 370
- Recieve proceed P2
- Rerun BH on centre or go beyond 337 to P4 for down local or GW
Burnley terminate for GW during occo
Arrive p1
Change ends
Get green hand signal
Burnley stabling sidings specifics
3 roads 1,2,3
Each hold 2x6
Access from GW line with a GW
Train docking a out of burnley siding can only acces p1
MBR siding 3 cleaning platform adjacent to road
Burnley station siding A specifics
Holds 1x6
Emergency only
Access from p4
What signal and route indicator to get to platform 8a
Sig 520 ‘8’
M to get out
Lay by siding specifics
2 roads 1&2
1x6
Access from 10, 10a, 11
Walking access from 12
MBR on running line side
Melbourne yard specifics
10 roads 1-10
1x6
Acres via freight bypass need G
Need M to enter yard or wash
Right arrow when exiting for freight bypass
MBR 4road B side trailing motor
To enter shunting neck for wash get W (only indicator we take)
North Melbourne siding specifics
8 roads 1-8
1x6
Share one dwarf
Letter K p6 nth mlb
Macaulay sidings specifics
7 roads 1-7
1, 3-7 1x6
2 is LRC
5-6-7 only Siemens xtrap
R2 no Siemens
Acces with u p2/4 nth mlb
LRC 5kmh
