reasons for inspection
The inspection itself consists of three parts:
When the osha inspector comes first on site field personnel should immediately_____.
Take photos
At the opening conference the CSHO will do what?
who should be at the opening conference?
employer and reps of each contractor
who should be on the inspection tour?
employer and employees
Correcting any alleged violations immediately shows?
compliance
At the closing conference the CSHO should do two things (primarily)
If a citation is received it must be posted for or until alleged violation is corrected whichever is according to the video there are 7 types of citations.
Three factors used in assessing penalties
adjustment factors
If a company wishes to contest a citation they must do so within ____.
15 working days
1) An entry permit should contain which of the following:
a) description of hazards.
b) Date and location of job, time of issue and expiration date.
c) Outline for proper testing procedure
d) List of required safety equipment
e) All of the above
e) All of the above
60%
d) Hydrogen sulfide and Carbon Monoxide
b) An area with visibility to outside only on one side.
a) True
6) Confined space air should be:
a) Automatically ventilated
b) Of no concern if initial test showed no hazardous conditions
c) continuously monitored and tested
d) None of the above
c) continuously monitored and tested
8) An attendant is all of the following except:
a) Always stationed outside the confined space
b) Competent person
c) In constant contact with those within
d) designed person
c) In constant contact
9) An asphyxiating atmosphere is one that contains less than oxygen.
a) 10%
b) 15.5%
c) 19.5%
d) 25%
c) 19.5%
10) What is the leading cause of death in confined spaces?
a) Engulfment
b) mechanical Equipment
c) Asphyxiation
d) Asbestos inhalation
c) Asphyxiation
11) Without testing is it possible to tell if oxygen has been depleted in a confined space?
a. Yes
b. No
a) Yes
1) Ladders are manufactured according to __ standards.
a) OSHA
b) NIOSH
c) BWC
d) ANSI
a) OSHA
2) There are four types of ladder ratings. Which should be found on construction sites?
a) Type 1-A 300 pounds
b) Type 1 250 pounds
c) Type ll 225 pounds
d) A and B
c) B and C
d) A and B