Pros - Missing Tooth? > Missing Teeth? > Flashcards

Missing Teeth? Flashcards

(88 cards)

Study These Flashcards
1
Q

How would you restore this?

A

Missing: Central Incisor

  • FDP (Pontic: Modified Ridge Lap)
  • Resin-bonded retainers might be used if the patient is very young and if the abutments are healthy teeth that have never been restored
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q

How would you restore this?

A
  • Missing: Maxillary Central Incisor
    • Implant size: 4 X 12 mm
    • Large nasopalatine foramen may interfere with implant placement.
    • Loss of the facial bone plate may necessitate bone grafting
    • Restoration: Ceramic crown over a custom UCLA abutment or preparable abutment
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q

How do you restore this?

A
  • Missing: Mandibular Central Incisor
  • Abutments: Central Incisor and Lateral Incisor
    • Implant is best option
    • Resin bonded contraindicated if abutments are rotated or mobile
    • If abutment teeth are prepped, could easily encroach on pulp which would lead to post/core
    • Pontic: Ovate/Modified Ridge Lap
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q

How would you restore this?

A
  • Missing: Mandibular Central Incisor
  • Implant: 3.3 X 12 mm
  • Considerations:
    • Treatment of choice!
    • Ideal space would be 7.3 mm
    • If inadequate space is available…
      • Ext all mandibular incisors
      • Place two 4 X 12 mm dental implants in the lateral incisor position
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q

How would you restore this?

A
  • Missing: Maxillary Lateral Incisor
  • Abutments: Central Incisor and Canine
  • Considerations:
    • If the canine is long, periodontally sound, and pontic will not contact in centric relation or excursions, a single-abutment cantilever fixed partial denture could be used
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q

How would you restore this?

A
  • Missing: Maxillary Lateral Incisor
  • Implant: 3.5 X 12 mm
  • Considerations:
    • Loss of incisor typicall results in loss of facial plate of bone leaving a facial concavity, which leads to an implant being placed too far lingual - leads to poor implant emergence profile
    • Ideally, bone grafting then implant placement
  • Restoration: Porcelain crown over a UCLA abutment
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q

How would you restore this?

A
  • Missing: Mandibular Lateral Incisor
  • Abutments: Central Incisor and Canine
  • Considerations:
    • Implant supported crown is the ideal choice
    • If FDP: potential pulpal involvment
    • Cantilever fixed partial dentures are not an option for the replacement of mandibular lateral incisors
    • If abutments are severely rotated/malposed, remove all mandiblar incisors then place canine to canine FDP
  • Retainers: Resin-Bonded Retainers
  • Pontic: Modified Ridge Lap
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q

How would you restore this?

A
  • Missing: Mandibular Lateral Incisor
  • Implant: 3 mm X 12 mm
  • Considerations:
    • Implant is treatment of choice
    • Need adequate M/D distance
    • If inadequate M/D space, consider ext of all mandibular incisors, place two 4 X 12 mm dental implants in the lateral incisor positions, then fabricate a four-unit restoration
  • Restoration: MCR over a one-piece implant
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q

How would you restore this?

Missing: Max first premolar…

A
  • Missing: Maxillary first premolar
  • Abutments: Canine and second premolar
  • Considerations:
    • Implant would be restoration of choice
    • If canine and second premolar are unrestored, consider cantilever prosthesis using MCR retainers on second premolar and first molar
    • A canine-guided occlusal scheme would be necessary to prevent excessive forces on the cantilver pontic
  • Pontic: Modified Ridge Lap
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q

How would you restore this?

Missing: Max first premolar…

A
  • Missing: Maxillary first premolar
  • Implant: 4 X 13 mm
  • Considerations:
    • Inadequate facial bone will require bone grafting
    • Implant may impinge upon maxillary sinus, may need sinus modification surgery
    • Osteotome sinus lift
  • Restoration: MCR over a custom UCLA abutment/preparable abutment
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q

How would you restore this?

Missing: Mandibular first premolar…

A
  • Missing: Mandibular First Premolar
  • Abutments: Canine and Second Premolar
  • Considerations:
    • Potential cantilever using second premolar and molar as abutments
  • Retainers: Metal Ceramic Crowns
  • Pontic: Modified Ridge Lap or Ovate MCR
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q

How would you restore this?

Missing: Mandibular First Premolar

A
  • Missing: Mandibular First Premolar
  • Implant: 4 X 11 mm
  • Considerations:
    • Position of the anterior loop of the mandiblar canal may interfere with implant placement
  • Restoration: MCR over a custom abutment (UCLA or preparable abutment)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q

How would you restore this?

Missing: Maxillary second premolar

A
  • Missing: Maxillary second premolar
  • Abutments: First premolar and first molar
  • Considerations:
    • MCR retainers will be required in cases with facial defects such as abfraction or decalcification
  • Retainers: MCR on the first premolar and MCR or full coverage gold crown on the first molar
  • Pontic: Modified Ridge Lap
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q

How would you restore this?

Missing: Maxillary second premolar

A
  • Missing: Maxillary second premolar
  • Implant: 4 X 11 mm
  • Considerations:
    • Maxillary sinus will likely interfere with placement of an implant of desireable length
    • May need sinus graft or vertical upfracture
  • Restoration: MCR over a custom abutment (UCLA or preparable abutment)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q

How would you restore this?

Missing: Mandibular second premolar

A
  • Missing: Mandibular second premolar
  • Abutments: First premolar and first molar
  • Considerations:
    • Esthetic considerations for first molar
    • Resin bonded retainers can be used if the first premolar is large and if the abutments are caries free or only minimally affected by caries
  • Retainers: MCR crown on the premolar and FGC on the molar
  • Pontic: Modified ridge lap or ovate
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q

How would you restore this?

Missing: Mandibular second premolar

A
  • Missing: Mandibular second premolar
  • Implant 4 X 10 mm
  • Considerations:
    • Potential loss of facial plate
    • Alveolar resorption may result in lack of height
    • May require bone graft prior to implant
  • Restorations: Ti-base
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q

How would you restore this?

Missing: Maxillary first molar

A
  • Missing: Maxillary first molar
  • Abutments: Second premolar and second molar
  • Retainers: MCR of 3/4 crown on the premolar and 7/8 crown on the molar
  • Pontic: Modified ridge lap MCR
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q

How would you restore this?

Missing: Maxillary first molar

A
  • Missing: Maxillary first molar
  • Implant: 5 X 11.5 mm
  • Considerations:
    • Maxillary Sinus
  • Restoration: Ti-Base/Custom Abutment
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q

How would you restore this?

Missing: Mandibular first molar

A
  • Missing: Mandibular first molar
  • Abutments: Second premolar and second molar
  • Considerations:
    • Tilted 2nd molar may require molar uprighting, proximal half crown, or telescope crown
  • Retainers: Zirconia, Emax, Gold
  • Pontic: All-metal hygienic, if patient is agreeable. Ifthe patient demands a ceramic occlusal portion, a pontic design that touches the ridge is needed, and metal should extend fully to the ridge to provide rigidity
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q

How would you restore this?

Missing: Mandibular first molar

A
  • Missing: Mandibular first molar
  • Implant: 5 X 10 mm
  • Considerations:
    • Loss of facial plate may lead to inadequate facial width
    • Alveolar resorption may result in insufficient heigh above mandibular canal
  • MCR over a custom abutment (UCLA or preparable abutment)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q

How would you restore this?

Missing: Maxillary second molar

A
  • Missing: Maxillary second molar
  • Implant: 5 X 11.5 mm
  • Considerations:
    • Maxillary sinus
  • Restoration: Zircona, MCR over Ti-base, UCLA or preparable abutment)
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q

How would you restore this?

MIssing: Mandibular second molar

A
  • Missing: Mandibular second molar
  • Implant: 5 X 11.5 mm
  • Considerations:
    • Lack of bone on facial plate
    • Inadqeuate alveolar bone height
    • Mental foramen
  • Restoration: Zirconia, Gold, Emax on Ti-base
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q

How would you restore this?

Missing: Maxillary canine

A
  • Missing: Maxillary canine
  • Abutments: Central incisor, lateral incisor and first premolar
  • Considerations:
    • Single implant would be ideal restoration
    • Using the two premolar and the lateral incisor as abutments is not desireable becuse it places too heavy a burden onthe smaller single abutment, the lateral incisor
  • Pontic: Modified ridge lap or ovate MCR, depending on the faciolingual dimension of the ridge
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q

How would you restore this?

Missing: Maxillary canine

A
  • Missing: Maxillary canine
  • Implant 4 X 15 mm
  • Considerations:
    • Ideal restoration
How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
How would you restore this? Missing: Mandibular canine
* Missing: Mandibular canine * Abutments: Central incisor, lateal incisor, and first premolar * Considerations: * Implant is ideal choice * If there has been extensive bone loss around th elateral incisor, or if it is tilted to produce a line of draw discrepancy, remove the lateral incisor and use both central incisors as abutments if a fixed partial denture is used * Pontic: Ovate
26
How would you restore this? Missing: Mandibular canine
* Missing: Mandibular canine * Implant 4 X 15 mm * Considerations: * Dental implant is the restoration of choice
27
How would you restore this? Missing: Maxillary central incisor and lateral incisor
* Missing: Maxillary central incisor and lateral incisor * Abutments: Central incisor and canine * Considerations: * If the central incisor and canine are unblemished and unusually large, consider pin modified partial coverage crowns * Patient acceptance and dentist skill are strong considerations * Pontics: Modified ridge lap
28
How would you restore this? Missing: Maxillary central incisor and lateral incisor
* Missing: Maxillary central incisor and lateral incisor * Implants: 4 X 12 mm (central), 3.5 X 12 mm (lateral) * Considerations: * Nasopalatine formane may interfere with implant placement * If loss of bone on facial, may need bone grafting * SPLINTING the dental implant restoration will reduce rotational forces on the abutment screws, lessening the possibility of screw loosening. * SPLINTING will increase restoration strength and stress distribution
29
How would you restore this? Missing: Mandibular central incisors
* Missing: Mandibular central incisors * Abutments: Lateral incisors * Considerations: * If any bone loss around lateral incisors, or if mal-positioned, remove them * Consider FDP from #22-27 * Pontics: Ovate or one-piece pontics with a modified ridge lap of pink porcelain
30
How would you restore this? Missing: Mandibular central incisors
* Missing: Mandibular central incisors * Implants: 3 X 12 mm * Considerations: * Need adequate M/D space * If not enough space, consider ext of all man incisors and place implants 4 X 12 mm in the lateral incisor position * Splint restorations, reduce rotational forces on abutment screws and increase strength/stress distribution
31
How would you restore this? Missing: Maxillary first and second premolars
* Missing: Maxillary first and scond premolars * Abutments: Canine and first molar * Considerations: * Full coverage crowns on first molar and canine * Pontics: Modified ridge lap
32
How would you restore this? Missing: Maxillary first and scond premolars
* Missing: Maxillary first and second premolars * Implants: 4 X 13 mm (1st premolar), 4 X 11.5 mm (second premolar) * Considerations: * Facial bone must be adequate * Maxillary sinus * Splint dental implants * Reduce rotational forces on abutment screws * Increase strength/stress distribution
33
How would you restore this? Missing: Mandibular first and second premolars
* Missing: Mandibular first and second premolars * Abutments: Canine and first molar * Considerations: * 1st Molar may need molar uprighting * Pontics: Ovate
34
How would you restore this? Missing: Mandibular first and second premolars
* Missing: Mandibular first and second premolars * Implants: 4 X 11 (first premolar), 4 X 10 mm (second premolar) * Considerations: * Anterior loop of mandiblar canal may intefere with implant placement * Adequate facial bone * Splinting implants * Reduce rotational forces on abutment screws * Increase restoration strength and stress distribution
35
How would you restore this? Missing: Maxillary second premolar and first molar
* Missing: Maxillary second premolar and first molar * Abutments: First premolar and second molar * Pontics: Modified ridge lap
36
How would you restore this? Missing: Maxillary second premolar and first molar
* Missing: Maxillary second premolar and first molar * Implants: 4 X 11 mm (second premolar), 5 X 11 mm (first molar) * Considerations: * Adequate facial bone * Maxillary sinus * Splint imaplants * Reduce rotational forces/lessen screw loosening * Strength/stress distribution
37
How would you restore this? Missing: Mandibular second premolar and first molar
* Missing: Mandibular second premolar and first molar * Abutments: First premolar and second molar * Considerations: * If small premolar, canine should be secondary abutment * Pontics: Modified ridge lap or ovate
38
How would you restore this? Missing: Mandibular second premolar and first molar
* Missing: Mandibular second premolar and first molar * Implants: 4 X 10 mm (second premolar), 5 X 10 mm (first molar) * Considerations: * Adequate facial bone * Mandibular canal * Splint restorations * Reduce rotational forces to lessen screw loosening * Strength/force distribution
39
How would you restore this? Missing: Maxillary first and second molars
* Missing: Maxillary first and second molars * Considerations: No FDP, no D abutment * Implants: 5 X 11 mm * Considerations: * Maxillary sinus * Splint dental implants * Reduce rotational force to lessen screw loosening * Strength/stress distribution
40
How would you restore this? Missing: Mandibular first and second molars
* Missing: Mandibular first and second molars * Considerations: FDP cannot be used due to no D abutment * Implants: 5 X 10 mm * Considerations: * Adequate facial bone * Mandibular canal * Splint implant restorations * Reduce rotational forces leading to less screw loosening * Strength/stress distribution
41
How would you restore this? Missing: Mandibular central incisor and lateral incisor
* Missing: Mandibular central incisor and lateral incisor * Abutments: Central incisor, lateral incisor, and canine * Considerations: * Inadequate bone support around central and lateral could lead to extraction * Could lead to 6 unit FDP 22-27 * Potential pulptal involvment with preps * Anterior guidance * Pontics: Ovate
42
How would you restore this? Missing: Mandibular central incisor and lateral incisor
* Missing: Mandibular central incisor and lateral incisor * Implants: 3 X 12 mm * Considerations: * Adequate M/D distance * Ideally 12 mm of space * If not enough space, ext 4 incisors and place 2 4 X 12 mm dental implants in lateral incisor positions * Splint restorations: * Lessen screw loosening * Better strength/stress distribution
43
How would you restore this? Missing: Maxillary central incisors
* Missing: Maxillary central incisors * Abutments: Both canines and lateral incisors * Considerations: * If bony support for lateral is poor, ext them and lengthen the FDP span * If lateral has long roots, they alone can be used as abutments * Pontics: Modified ridge lap
44
How would you restore this? Missing: Maxillary central incisors
* Missing: Maxillary central incisors * Implants: 4 X 12 mm * Considerations: * Nasopalatine foramen (incisive canal) * Adequate facial bone * Splint restoration * Will reduce rotational forces on abutment screws which will lessen screw loosening * Strength/stress distribution
45
How would you restore this? Missing: Maxillary lateral incisor and canine
* Missing: Maxillary lateral incisor and canine * Abutments: Both central incisors and premolars * Considerations: * Span length * Abutment angle/position * Root length * If second premolar has drifted mesially, may not be necessary to use as abutment * Restore in Group Function
46
How would you restore this? Missing: Maxillary lateral incisor and canine
* Missing: Maxillary lateral incisor and canine * Implants: 3 X 12 mm (lateral), 4 X 15 mm (canine) * Considerations: * Adequate facial bone * Splint restorations * Reduce rotational forces for less screw loosening * Strength and stress distribution
47
How would you restore this? Missing: Mandibular lateral incisor and canine
* Missing: Mandibular lateral incisor and canine * Abutments: Both central incisors and first premolar * Considerations: * Short edentulous span * 2nd premolar abutment not necessary * Pontics: Modified ridge lap
48
How would you restore this? Missing: Mandibular latreal incisor and canine
* Missing: Mandibular lateral incisor and canine * Implants: 3 X 12 mm (lateral), 4 X 15 (canine) * Considerations: * Implants are restoration of choice * Splinting * Reduce rotatioanal forces, less screw loosening * Strength/stress distribution
49
How would you restore this? Missing: Maxillary canine and first premolar
* Missing: Maxillary canine and first premolar * Abutments: Central incisor, lateal incisor, second premolar, and first molar * Considerations: * Group function should be used * Difficult restoration * Pontics: Modified ridge lap
50
How would you restore this? Missing: Maxillary canine and first premolar
* Missing: Maxillary canine and first premolar * Implants: 4 X 15 mm (canine), 4 X 13 mm (first premolar) * Considerations: * Adequate facial bone * Maxillary sinus for premolar implant * Splint dental implant: * Less screw loosening * Strength/stress distribution
51
How would you restore this? Missing: Mandibular canine and first premolar
* Missing: Mandibular canine and first premolar * Abutments: Central incisor, lateral incisor, and second premolar * Considerations: * Use group function in restoring the occusion * Difficult restoration however rarely encountered * Pontics: Modified ridge lap
52
How would you restore this? Missing: Mandibular canine and first premolar
* Missing: Mandibular canine and first premolar * Implants: 4 X 15 mm (canine), 4 X 11 mm (first premolar) * Considerations: * Anterior loop of mandibular canal * Adequate facial bone * Spolint dental implants * Reduce rotaional forces, less screw loosening * Strength/stress distribution
53
How would you restore this? Missing: Both maxillary incisors and one lateal incisor
* Missing: Both maxillary central incisors and one lateral incisor * Abutments: Both canines and the remaining lateral incisor * Considerations: * If the remaining lateal is questionable, ext and FDP should be lengthened to include first premolars * Inclusion of first premolars as abutments will depend on span length and curvature * Pontic: Modified ridge lap
54
How would you restore this? Missing: Both maxillary central incisors and one lateral incisor
* Missing: Both maxillary central incisors and one lateral incisor * Implants: 4 X 12 (centrals), 3 X 12 (lateral) * Considerations: * Large nasopalatine foramen * Adequate facial bone * Splint resotraiton * Lessl rotational forces, less screw loosening * Strength/stress distribution
55
How would you restore this? Missing: All maxillary incisors
* Missing: All maxillary incisors * Abutments: Both canines and first premolars * Considerations: * Counteract lever arm by double abuting premolars and canines * If anterior curvature is slight and/or canine are exceptionally large, premolars may be omitted as abutments. * Pontics: Modified ridge lap
56
How would you restore this? Missing: All maxillary incisors
* Missing: All maxillary incisors * Implants: 4 X 12 mm (lateral incisors) * Considerations: * Adequate facial bone
57
How would you restore this? Missing: All mandibular incisors
* Missing: All mandibular incisors * Abutments: Both canines * Considerations: * No need to use double abutments on the mandibular canine to canine FDP due to forces being less destructive * If pt has a lone lateral or central, consider extracting, wouldn't really help significantly * Pontics: Modified ridge lap
58
How would you restore this? Missing: All mandibular incisors
* Missing: All mandibular incisors * Implants: 4 X 12 mm (lateral incisors) * Considerations: * Increased available space allows for the use of the large 4 diameter implants when replacing all 4 mandibular incisors
59
How would you restore this? Missing: Maxillary first and second premolars and first molar
* Missing: Maxillary first and second premolars and first molar * Abutments: Canine and second molar * Considerations: * FDP only considerated if clinical crowns are long and perfect aligned * Only recommended opposing REMOVEABLE * Canine guidance is important in this situation
60
How would you restore this? Missing: Maxillary first and second premolars and first molar
* Missing: Maxillary first and second premolar and first molar * Implants: 4 X 13 (first premolar), 4 X 11 (second premolar), 5 X 11 (molar) * Considerations: * 3 Implants is ideal, but not if they're too close together * Maxillary sinus * Splints restoration * Reduce rotational forces, helps with screw loosening * Increase strength/stress distribution
61
How would you restore this? Missing: Mandibular first and scond premolars and first molar
* Missing: Mandibular first and second premolars and first molar * Considerations: * FDP contraindicated due to interarch space and forces directed at inner curvature of occlusal plane resulting in lifting forces on the retainers * Implants: 4 X 11 (first premolar) 4 X 10 (second premolar), 5 X 10 (first molar) * 3 Implants are ideal if there is enough space * Anterior loop of IAN * Adequate facial bone * Splint restoration * Reduce rotational forces, less screw loosening * Strength/better stress distribution
62
How would you restore this? Missing: Maxillary central incisor and opporiste-side lateral incisor
* Missing: Maxillary cenral incisor and opposite-side lateral incisor * Abutments: lateral incisor, central incisor, and canine * Considerations: * Keyway placed at the distal aspect of the central incisor retainer to accomodate a key on the mesial aspect of th elateral incisor pontic * If the central incisor is malpositioned or rotated, its extraction will simplify the restoration and improve its prognosis
63
How would you restore this? Missing: Maxillary central incisor and opposite-side lateral incisor
* Missing: Maxillary central incisor and opposite-side lateral incisor * Implants: 4 X 12 mm (central incisor), 3 X 12 mm (lateral incisor) * Considerations: * Adequate facial bone
64
How would you restore this? Missing: Mandibular central incisor and opposite-side lateral incisor
* Missing: Mandibular central incisor and oposite-side lateral incisor * Abutments: Lateral incisor, central incisor, and canine * Considerations: * Completely rigid fixed partial denture is used due to short span length and small teeth * Extracting central would simplify and improve prognosis of FDP * Crown preps may turn into endo * Pontics: Modified ridge lap or ovate
65
How would you restore this? Missing: Mandibular central incisor and opposite-side lateral incisor
* Missing: Mandibular central incisor and opposite-side lateral incisor * Implants: 3 X 12 mm * Considerations: * Adequate M/D space * Ideally 7 mm * If inadequate space, consider extraction of all mandibular incisors, place two 4 X 12 dental implants in the lateral incisor positions and fabricate a 4 unit prosthesis
66
How would you restore this? Missing: Both maxillary lateral incisors and one central incisor
* Missing: Both maxillary lateral incisor and one central incisor * Abutments: Central incisor and both canines * Considerations: * Nonrigid connector between D aspect of central and M aspect of adjacent lateral incisor pontic * If the central incisor is malposed or periodontally compromised, it should be extracted
67
How would you restore this? Missing: Both maxillary lateral incisors and one central incisor
* Missing: Both maxillary incisors and one central incisor * Implants: 4 X 12 (central), 3 X 12 (lateral incisor) * Considerations: * Nasopalatine formamen (incisive canal) may interfere with placement * Adequate facial bone * Splint Restoration: * Reduce rotational forces, less screw loosening * Increase strength/stress distribution
68
How would you restore this? Missing: Maxillary lateral incisor and first premolar
* Missing: Maxillary lateral incisor and first premolar * Abutments: central incisor, canine, and second premolar * Considerations: * A nonrigid connector should be placed between the canine and first premolar * Pontic: Modified ridge lap
69
How would your restore this? Missing: Maxillary lateral incisor and first premolar
* Missing: Maxillary lateral incisor and first premolar * Implants: 3 X 12 (lateral incisor), 4 X 13 (first premolar) * Considerations: * Implants are ideal restoration * Adequate facial bone * Maxillary sinus
70
How would you restore this? Missing: Mandibular lateral incisor and first premolar
* Missing: Mandibular lateral incisor and first premolar * Abutments: Central incisor, canine, and second premolar * Considerations: * A nonrigid connector should be placed between the canine and first premolar * Pontics: Modified ridge lap
71
How would you restore this? Missing: Mandibular lateral incisor and first premolar
* Missing: Mandibular lateral incisor and first premolar * Implants: 3 X 12 (lateral incisor), 4 X 11 (first premolar) * Considerations: * Implants are restoration of choice * Need adquate M/D space * If inadequate space, consider extraction of all mandibular incisors, place two 4 X 12 implants in lateral incisor positions * Anterior loop ofIAN * Adequate facial bone
72
How would you restore this? Missing: Maxillary canine and second premolar
* Missing: Maxillary canine and second premolar * Abutments: central incisor, lateral incisor, first premolar, and first molar * Considerations: * A nonrigid connector should be plaed between the first premolar retainer and second premolar pontic * Pontics: Modified ridge lap * Consider 3/4 or 7/8 crown on molar
73
How would you restore this? Missing: Maxillary canine and second premolar
* Missing: Maxillary canine and second premolar * Implants: 4 X 15 (canine), 4 X 11 (second premolar) * Considerations: * Implants would be restoration of choice * Adequate facial bone * Maxillary sinus
74
How would you restore this? Missing: Mandibular canine and second premolar
* Missing: Mandibular canine and second premolar * Abutments: Central incisor, lateral incisor, first premolar, and first molar * Consideration: * Nonrigid connector should be placed between the first premolar retainer and second premolar pontic * Pontics: Modified ridge lap
75
How would you restore this? Missing: Mandibular canine and second premolar
* Missing: Mandibular canine and second premolar * Implants: 4 X 15 (canine), 4 X 10 (second premolar) * Considerations: * Implant is ideal choice * Sufficient Bone * Mental foramen
76
How would you restore this? Missing: All maxillary incisors and one first premolar
* Missing: All maxillary incisors and one first premolar * Abutments: Both canines, the opposite-side first premolar and the second premolar * Considerations: * A nonrigid connector should be placed at the D aspect of the retainer on the canine pier abutment
77
How would you restore this? Missing: All maxillary incisors and one first premolar
* Missing: All maxillary incisors and one first premolar * Implants: 4 X 12 (lateral) and 4 X 13 (first premolar) * Considerations: * Implant is restoration of choice * Facial plate * Potential bone grafting * Maxillary Sinus * Sinus Lift
78
How would you restore this? Missing: All mandibular incisors and one first premolar
* Missing: All mandibular incisors and one first premolar * Abutments: Both canines and second premolar * Considerations: * A nonrigid connector should be placed at the D aspect of the retainer on the canine pier abutment
79
How would you restore this? Missing: All mandibular incisors and one first premolar
* Missing: All mandibular incisors and one first premolar * Implants: 4 X 12 (lateral incisors), 4 X 11 (first premolar) * Considerations: * Implant is restoration of choice * Anterior loop of mandibular canal
80
How would you restore this? Missing: Maxillary lateral incisor and first and second premolars
* Missing: Maxillary lateral incisor and first and second premolars * Abutments: Canine and first molar * Considerations: * Canine guided posterior disocclusion * The short lever arm created by the lateral incisor cantilever should be adequately offset by the long span from first molar to canine
81
How would you restore this? Missing: Maxillary lateral incisor and first and second premolars
* Missing: Maxillary lateral incisor and first and second premolars * Implants: 3 X 12 mm (lateral incisor), 4 X 13 mm (first premolar), 4 X 11 (second premolar) * Considerations: * Implant is restoration of choice * Facial bone volume * Maxillary sinus * Splinting dental implant restoration * Reduce rotational forces on abutment screws * Incrase strength/stress distribution
82
How would you restore this? Missing: Mandibular lateral incisor and first and second premolars
* Missing: Mandibular lateral incisor and first and second premolars * Abutments: Canine and first molar * Considerations: * Canine guided posterior disocclusion * The short lever arm created by the lateral incisor cantilever should be adequately offset by the long span from first molar to canine
83
How would you restore this? Missing: Mandibular lateral incisor and first and scond premolars
* Missing: Mandibular lateral incisor and first and second premolar * Implants: 3 X 12 (lateral incisor) 4 X 13 (first premolar) 4 C 10 (second premolar) * Considerations: * Implant is restoration of choice * Adequate M/D space for lateral implant * If not enough space, consider ext of remaining man incisors and implants on laterals * IAN Canal * Facial bone * Splint implant restorations
84
How would you restore a missing: Maxillary first premolar and first molar...
* Missing Maxillary first premolar and first molar * Abutments: Canine, second premolar, and second molar * Considerations: * A nonrigid connector should be placed on the D aspect of the second premolar retainer
85
How would you restore this? Missing: Maxillary first premolar and first molar
* Missing: Maxillary first premolar and first molar * Implants: 4 X 13 (first premolar), 5 X 13 (first molar) * Considerations: * Available facial bone * Max sinus
86
How would you restore this? Missing: Manibular first premolar and first molar
* Missing: Mandibular first premolar and first molar * Abutments: Canine, second premolar, and second molar * Considerations: * A nonrigid connector shoiuld be placed on the distal aspect of the second preolar retainer * Pontics: Modified Ridge Lap MCR on the first premolar and all-metal hygienic pontic on the first molar
87
How would you restore this? Missing: Mandibular first premolar and first molar
* Missing: Mandibular first premolar and first molar * Implants: 4 X 11 (first premolar), 5 X 10 mm (first molar) * Considerations: * Implants are ideal * Available facial bone * Man canal * Mental foramen
88
How would your restore this? Missing: Maxillary central incisor, lateral incisor, and first and second premolars on one side
* Missing: Maxillary cenral incisor, laterl incisor, and first and second premolars on one side * Considerations: This would be an extremely difficult fixed partial denture in either the max or man arch. The span lengths of both edentulous spaces are too great for nonrigid connectors with either pontic. Implant supported MCR or a removeable partial denture are preferable * Implants: 4 X 12 (central incisor), 3 X 12 (lateral incisor), 4 X 13 (first premolar), 4 X 11 (second premolar) * Considerations: * Implants are ideal * Available facial bone * Max sinus * Splint dental restorations * Reduce rotational forces, less screw loosening * Strength/stress distribution
Pros - Missing Tooth?
flashcards
Decks in class (1)
# Cards
Brainscape helps you reach your goals faster, through stronger study habits.
© 2026 Bold Learning Solutions. Terms and Conditions