Multiple Chocies

Question 1

1. Which voltage is applied to the paper to transfer the toner to the paper in an EP process laser printer?

A. +600VDC
B. –600VDC
C. +6000VDC
D. –6000VDC

Answer 1

a

Question 2

2. Which types of printers are referred to as page printers because they receive their print job instructions one page at a time? (Choose two.)

A. Daisy-wheel
B. Dot-matrix
C. Inkjet
D. Laser
E. Thermal

Answer 2

c d

Question 3

3. Which of the following is not an advantage of a Universal Serial Bus (USB) printer interface?

A. It has a higher transfer rate than a serial connection.
B. It has a higher transfer rate than a parallel connection.
C. It automatically recognizes new devices.
D. It allows the printer to communicate with networks, servers, and workstations.

Answer 3

D

Question 4

4. You have a finance manager who needs to print contracts in triplicate. Which type of printers are best for printing on multipart forms?
   A. Inkjet printers
   B. Laser printers
   C. Thermal printers
   D. Dot-matrix printers

Answer 4

d

Question 5

5. Which step in the EP imaging process uses a laser to discharge selected areas of the photosensitive drum, thus forming an image on the drum?
   A. Exposing
   B. Transferring
   C. Developing
   D. Cleaning

Answer 5

A

Question 6

6. Which of the following is fed through an extruder on a 3D printer to create objects?
   A. Resin
   B. Dye
   C. Filament
   D. Extrusion powder

Answer 6

c

Question 7

7. Recently, employees have been printing off unauthorized materials that may contain hate speech. Which of the following can be used to see which users printed specific jobs?

A. Audit logs
B. Badging
C. User authentication
D. Secured prints

Answer 7

a

Question 8

8. Which device in an inkjet printer contains the print head?
   A. Toner cartridge
   B. Ink cartridge
   C. Daisy wheel
   D. Paper tray

Answer 8

b

Question 9

9. What is the correct order of the steps in the EP imaging process?

A. Developing, exposing, transferring, fusing, charging, cleaning, processing
B. Charging, processing, exposing, developing, transferring, fusing, cleaning
C. Processing, transferring, exposing, developing, charging, cleaning, fusing
D. Processing, charging, exposing, developing, transferring, fusing, cleaning

Answer 9

d

Question 10

10. The network administrator has set up security on office MFDs that requires users to authenticate before printing. Which of the following are valid methods for users to authenticate to the MFD? (Choose two.)

A. Use an authentication log.
B. Enable secured print.
C. Type their username and password on the MFD’s touchscreen.
D. Use SMB.
E. Use their company ID for badging.

Answer 10

c e

Question 11

11. What is typically included in the EP laser printer toner cartridge? (Choose three.)
    A. Toner
    B. Print drum
    C. Laser
    D. Cleaning blade

Answer 11

a b d

Question 12

12. What happens during the developing stage of laser printing?
    A. An electrostatic charge is applied to the drum to attract toner particles.
    B. Heat is applied to the paper to melt the toner.
    C. The laser creates an image of the page on the drum.
    D. An electrostatic charge is applied to the paper to attract toner particles.

Answer 12

a

Question 13

13. Which of the following are possible interfaces for printers? (Choose three.)
    A. Parallel
    B. SATA
    C. USB
    D. Network

Answer 13

a c d

Question 14

14. You have just installed a new printer, but it prints only garbled text. Which of the following is likely the problem?
    A. Wrong IP address
    B. Worn print head
    C. Incorrect printer drivers
    D. Unsupported printer

Answer 14

c

Question 15

15. Which printer contains a wheel that looks like a flower with raised letters and symbols on each “petal”?
    A. Inkjet printer
    B. Daisy-wheel printer
    C. Dot-matrix printer
    D. Laser printer

Answer 15

b

Question 16

16. What part of a laser printer supplies the voltages for charging and transferring corona assemblies?
    A. High-voltage power supply (HVPS)
    B. DC power supply (DCPS)
    C. Controller circuitry
    D. Transfer corona

Answer 16

a

Question 17

17. Which printer part gets the toner from the photosensitive drum onto the paper?
    A. Laser-scanning assembly
    B. Fusing assembly
    C. Corona assembly
    D. Drum

Answer 17

c

Question 18

18. Which step in the laser printer printing process occurs immediately after the exposing phase?
    A. Charging
    B. Fusing
    C. Transferring
    D. Developing

Answer 18

d

Question 19

19. Which laser printer component permanently presses the toner into the paper?
    A. Transfer corona
    B. Fuser assembly
    C. Printer controller circuitry
    D. Paper transport assembly

Answer 19

b

Question 20

20. Which of the following most accurately describes how to obtain a firmware upgrade for your laser printer?
    A. Download the firmware upgrade for free from the manufacturer’s website.
    B. Pay to download the firmware upgrade from the manufacturer’s website.
    C. Have a certified laser printer technician come to your site and install a new firmware chip.
    D. Contact the manufacturer of the printer, and they will send you the firmware upgrade on a DVD.

Answer 20

a

Question 21

1. Which of the following could be used with an analog monitor? (Choose two.)
   A. HDMI
   B. DVI-A
   C. DVI-D
   D. DisplayPort
   E. VGA

Answer 21

B E

Question 22

2. You are attaching an external hard drive to a computer with USB 2.0 ports. The user is concerned about data transfer speed. What is the maximum speed of USB 2.0?
   A. 480 Mbps
   B. 5 Gbps
   C. 10 Gbps
   D. 20 Gbps

Answer 22

A

Question 23

3. You got a new desktop computer for a designer at your company. On the front panel is a rectangular yellow USB port. What does that mean?
   A. It’s USB 2.0.
   B. It’s USB 3.0.
   C. It’s a port capable of charging devices even with the system powered off.
   D. It’s a port to be used with USB-C compatible devices.

Answer 23

C

Question 24

4. You are installing a replacement monitor on a desktop computer. Which of the following is true regarding a monitor’s refresh rate?

A. As long as the graphics adapter can refresh the image at a particular rate, the attached monitor can accommodate that refresh rate.
B. The refresh rate is normally expressed in MHz.
C. The refresh rate is normally selected by using the controls on the front panel of the monitor.
D. As you lower the resolution, the maximum refresh rate allowed tends to increase.

Answer 24

d

Question 25

5. Which of the following connector types is typically not associated with hard drive use? A. USB-C B. eSATA C. DB-9 D. SCSI

Answer 25

A

Question 26

6. The company photographer is interested in buying a new digital camera. He wants to be able to plug it directly into his laptop to transfer pictures for editing. What type of connector will most likely be on his camera? A. Mini-USB B. Thunderbolt C. Molex D. Lightning

Answer 26

A

Question 27

7. You are installing a new video card that has an HDMI port. Which of the following is true about HDMI cables? (Choose all that apply.) A. They can transmit analog or digital signals. B. They can transmit audio as well as video. C. They are not used to connect to projectors. D. They can use HDMI or mini-HDMI connectors.

Answer 27

b d

Question 28

8. Which of the following display interfaces is equivalent to DisplayPort with PCIe added in? A. Thunderbolt B. HDMI C. DVI D. VGA

Answer 28

a

Question 29

9. Which two of the following standards use the same connector? (Choose two.) A. eSATA B. Thunderbolt 3 C. USB4 D. USB 2.0 E. Mini-USB

Answer 29

B C

Question 30

10. How do you connect a DVI-A interface on a peripheral to a DVI-D interface on the computer? A. With a DVI-I cable. B. With a cable that is terminated on one end with a DVI-A connector and on the other end with a DVD-D connector. C. You wouldn’t interconnect those two interfaces. D. With a standard DVI cable.

Answer 30

C

Question 31

11. A technician says he needs to provide power to an older IDE hard drive and a DVD-ROM in a desktop. The computer now has a new fully modular power supply, and the technician wants to know what type of power connectors he should use. What do you tell him? A. SATA B. SCSI C. Serial D. Molex

Answer 31

D

Question 32

12. Which of the following connectors is oval shaped? A. Micro-USB B. Mini-USB C. Thunderbolt 2 D. Thunderbolt 3

Answer 32

D

Question 33

13. Which of the following connector types are capable of conducting power and transmitting data? (Choose all that apply.) A. Lightning B. Molex C. USB-C D. DB-9 E. Micro-USB

Answer 33

A C E

Question 34

14. Which of the following statements is true about eSATA cables and connectors? A. eSATA cables provide power and data to devices. B. eSATA connectors are smaller than USB-C connectors. C. eSATA is faster than USB4 and Thunderbolt 3. D. eSATA maximum throughput is 6 Gbps.

Answer 34

D

Question 35

15. Which of the following is not an example of a connector for a standard peripheral input device? A. 1/8" jack B. Molex C. D-sub D. USB

Answer 35

B

Question 36

16. You are asked to hook up a projector in a classroom. What type of cable are you most likely to need? A. USB Type A B. eSATA C. HDMI D. DB-9

Answer 36

C

Question 37

17. A user with an iPhone 12 needs to charge her device and asks you to bring a cable. Which of the following connector types should you ensure that the cable has? A. Thunderbolt B. Lightning C. Mini-USB D. Micro-USB

Answer 37

B

Question 38

18. Which of the following types of cables will transfer data at the slowest rate? A. USB4 B. Serial C. Thunderbolt 3 D. HDMI

Answer 38

B

Question 39

19. What is the maximum data transfer rate of USB High Speed? A. 10 Gbps B. 5 Gbps C. 480 Mbps D. 12 Mbps

Answer 39

C

Question 40

20. VGA cables use what type of signal between the adapter and monitor? A. Digital B. Analog C. Composite D. Compressed

Answer 40

B