Nitrogen Compounds Flashcards by ArtBiking 2113

Amines may be classified as…?

primary, secondary, tertiary,
depending on no. of alkyl/aryl grp attached to N atom
(primary is 1 R grp, tertiary is 3 R grp)

NOTE: quaternary ammonium ion is organic equivalent of NH4+ ion where 4 alkyl/aryl grp hv replaced H atoms

oso can b classified aliphatic, aromatic

How well did you know this?

Not at all

Perfectly

Describe nomenclature of amines

aliphatic
- named by specifying alkyl grp attached to N atom, follow by suffix amine
eg
methylamine (1 deg), phenylmethylamine (1 deg), diethylamine (2 deg)

aromatic
- N atom directly attach to benzene ring
- named as derivatives of simplest aromatic amine (phenylamine)
eg
phenylamine (simplest), 4-methylphenylamine, N-methylphenylamine

in compounds where amine grp is named as substituent, prefix amino- is used

How well did you know this?

Not at all

Perfectly

Explain boiling point of amines

Within homologous series, bp generally increase w increasing e- cloud size (seen by increasing Mr)
bcos
- w increasing Mr, size & polarisability of e- cloud increase
=> increasing strength/extent of intermolecular id-id attract n, require more energy to overcome
for isomeric amines bp tend follow 3 deg < 2 deg < 1 deg
bcos
- more energy needed overcome stronger intermolecular H bonding in primary, secondary amines vs weaker intermolecular pd-pd attract n of tertiary amine
=> tertiary amine hv lowest bp
- primary vs secondary: presence of more alkyl grp bonded to N in secondary amine cause steric effect, decreases availability of lp of e- on N for intermolecular H bonding. Secondary amine hv weaker intermolecular H bonding, needs less energy overcome
=> secondary amine hv lower bp than primary amine
Amines hv higher bp than hydrocarbons of similar e- cloud size
bcos,
- more energy needed to overcome stronger intermolecular H bonding in amines vs weaker intermolecular id-id attract n for hydrocarbon
Amines hv lower bp than alcohols of similar Mr
bcos,
- N-H bond less polar than O-H bond, intermolecular H bond in amines weaker, need less energy overcome than those in alcohols

How well did you know this?

Not at all

Perfectly

Explain solubility of amines in water

Amines w small molecular size soluble in water
bcos,
- amines can form H bond w water molecules
- energy released by form n H bond btw amine, H2O molecules enough overcome intermolecular H bond btw H2O & amine molecules respectively
Amines w larger molecular size less soluble in water
bcos,
- as alkyl/aryl (R) grp(s) bcome bulkier/larger, solubility in water decrease as greater hydrophobic nature of R grp decrease strength of interact n btw amine & water

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of nitriles + H

R&C:
1. LiAlH4 in dry ether
or
2. H2 w Ni catalyst, high temp & Pa
or
3. H2 w Pd/Pt catalyst

type: reduct n

NOTE:
-CN –> -CH2NH2 (forms primary smine)

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of amides + H

R&C: LiAlH4 in dry ether
type: reduct n

NOTE: H2(g), NaBH4 cnt b used reduce amides,
this rxn forms primary amine

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of halogenoalkane and NH3

R&C: excess conc NH3 in ethanol, heat in sealed tube
type: Nu Sub

NOTE:
- forms primary amine
- use of excess NH3 discourage form n of side-pdt, give primary amine as MAIN pdt
- if excess of RX is used, main pdt formed is quaternary ammonium salt

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of nitrobenzene and H

R&C:
Sn in excess conc HCl, heat (reduct n),
followed by add n NaOH(aq) (neutral n)

type: reduct n

NOTE:
- other reducing agent cnt b used
- pdt formed in 1st step is C6H5NH3+Cl-
- NaOH(aq) added in 2nd step for acid-base rxn w acidic C6H5NH3+Cl to form required pdt, C6H5NH2
- Oni method to prepare phenylamine in syllabus

How well did you know this?

Not at all

Perfectly

In aqueous state, amine behaves as … Thus, any process that … availability of … for bonding with a proton will cause amine to be a …

Bronsted-Lowry base,
increases,
lone pair of electrons,
stronger base

How well did you know this?

Not at all

Perfectly

Explain relative basicity of ammonia, ethylamine and phenylamine

order of base strength:
ethylamine > ammonia > phenylamine

ethylamine stronger than ammonia bcos
- e-donating ethyl grp increase e- density of lp of e- on N atom
=> lp e- more available to accept proton (form dative bond w H+)
- ammonia no e-donating grp attached to N atom, so lp e- on N less available accept proton

phenylamine weaker base than ammonia bcos
- in phenylamine, lp e- on N atom delocalised into benzene ring
=> lp e- less available to accept proton
- lp e- on N in ammonia not delocalised so more available to accept proton

How well did you know this?

Not at all

Perfectly

Describe effects of substituents on basicity

e-donate grp cause increase in basicity
Bcos,
- increase e-density of lp e- on N atom
- lp more available accept H+ ion
- stronger base
e-withdraw grp cause decrease in basicity
Bcos,
- decrease e-density of lp e- on N atom
- lp less available to accept H+ ion
- weaker base

Generally,
- more grp —> greater effect
- effect decrease w dist fr N atom

How well did you know this?

Not at all

Perfectly

Describe basicity of amines in gaseous phase

amine behave as Lewis base
N atom use its lp e- form dative bond w e-deficient species
=> any process increasing availability of lp e- for bonding w proton cause amine bcome stronger base

NOTE:
In gaseous phase, no water molecules to interact w amine molecules so discuss n amines as Bronsted Lowry base not considered

How well did you know this?

Not at all

Perfectly

Explain relative basicity of primary, secondary and tertiary aliphatic amines in gaseous phase

Basicity: tertiary>secondary>primary

Order of base strength:
Trimethylamine>dimethylamine>methylamine
Bcos,
- from methylamine to trimethylamine, increase in no of e-donate alkyl grp increases e-density of lp e- on N atom
=> lp more available form dative bond to e-deficient species

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of amines and acid

R&C: HCl(aq)/H2SO4(aq) or any aq acid, r.t.p.
Type: neutral n

Note:
Forms salts

How well did you know this?

Not at all

Perfectly

Name reagent, conditions and type of reaction of amines and acyl chloride

R&C: anhydrous acyl chloride
Type: condensat n

Note:
- cnt use RCOOH as neutral n occur instead
- ONLY method form amides

How well did you know this?

Not at all

Perfectly

Name reagent, conditions, type of reaction, OBSERVATION and APPLICATION of phenylamine and Br2

Study These Flashcards

R&C: Br2(aq)
Type: e- sub
Observ n: decolour n orange Br2(aq) sol n w form n white ppt
Application: chemical test for phenylamine (NOTE: phenol give similar observ n)

As compared to electrophilic substitution of benzene, conditions required for that of phenylamine are considered mild (ie rtp, no catalyst). Why?

Study These Flashcards

in phenylamine, lp e- on N atom delocalised into benzene ring
=> increased e- density in ring makes it more readily attacked by e-philes (activated towards e- sub)

What are amides?

Study These Flashcards

derivatives of RCOOH containing structural unit - O= C-N- -

Describe nomenclature of amides

Study These Flashcards

generally named by replace ‘e’ of alkanes w ‘-amide’
eg ethanamide
C atom of -CONH2 is NUMBERED 1
substituent grp bonded to N given prefix N-
eg N-methylpentanamide

Explain boiling and melting point of amides

Study These Flashcards

RCONH2 and RCONHR’ amides can form intermolecular H bond due to presence of N-H bond
=>expected to have higher mp/bp than RCONR’R’’ amides
RCONR’R’’ amides NO H bond due to absence of H atom bonded to N

Explain solubility of amides in water

Study These Flashcards

amide can form H bond w water molecules
=> expect smaller amides to be soluble in water
larger amides tend hv larger hydrophobic section, cause decreased solubility (id-id)

Explain lack of basicity of amides

Study These Flashcards

Amides are NEUTRAL (not basic, neutral to litmus)
Bcos
- lp e- on N atom delocalised w adjacent C=O thereby reduce e-density on N atom
=> N atom less available accept/ form dative bond to proton (H+)

Name reagent, condition and type of reaction of acyl chloride and NH3 / amine

Study These Flashcards

R&C:
1. To form RCO2NH2 :
RCOCl w NH3, rtp (readily react)

To form RCO2NHR’ :
ROCl w primary amine
To form RCO2NHR’R’’ :
ROCl w secondary amine

Type: condensat n

Describe overview of hydrolysis of amides

Study These Flashcards

(adding H2O) involve cleavage of C-N bond in amide
forms carboxylic acid & ammonia/amine
in basic medium, acid salt forms (from RCOOH)
in acidic medium, NH4+/ amine salt forms

Name reagent, condition and type of reaction of amide and acid

R&C: HCl(aq)/H2SO4(aq), heat under reflux Type: acidic hydrolysis

Name reagent, condition and type of reaction of amide and base

R&C: NaOH(aq)/KOH(aq), heat under reflux Type: basic hydrolysis NOTE: in any rxn where ammonia forms, this can be used to test presence of RCONH2

Name reagent, condition and type of reaction of amides + H

R&C: LiAlH4 in dry ether Type: reduct n Note: Cnt use H2 (g) or NaBH4

Describe some reagent and conditions to distinguish RCONH2, ammonium salts and amines

1. NaOH(aq), heat - to distinguish RCONH2 amides fr other organic cpds - Observ n: pungent NH3 gas evolved turned moist red litmus paper blue NOTE: ammonium salts oso liberate NH3(g) on warming w NaOH (see Data Booklet QA for Cation tests) 2. Br2(aq) - distinguish Phenylamine fr other cpd (except phenol) - Observ n: orange Br2(aq) decolourise w form n white ppt 3. Dilute acid (eg HCl aq) - distinguish Amines insoluble in water fr other insoluble organic cpd - observ n: amine insoluble in water but SOLUBLE in dilute acid give homogenous sol n (Bcos Amine react in neutral n rxn form ionic salt soluble in water due to form n strong ion-dipole interact n btw ion & water)

What is amino acid? How about a α-amino acid? Give general formula

- amino acid contain >= 1 -COOH & 1 amino grp (-NH2) - α-amino acid is an amino acid where both -NH2 & -COOH grp r direct bonded to same C atom (α-carbon) - general formula of α-amino acid is H2N- H-C-R -COOH

Describe nomenclature of amino acid

- named as derivatives of RCOOH eg 2-aminoethanoic acid (glycine), 2-amino-3methylbutanoic acid (valine)

Define zwitterion

- Amino acid exist predominantly as electrically neutral dipolar ion (zwitterion)

Describe physical properties of amino acids

1. Exist as crystalline solids w high mp (> 200 deg C) Bcos - large amt energy needed overcome strong e-static force attract n btw zwitterion 2. Soluble in water Bcos - ion-dipole interact n (similar to ionic cpd) formed w water molecules cause release of sufficient energy, cause detachment of zwitterion fr crystal lattice for solvat n

Describe neutralisation reactions of amino acids

- zwitterion hv amphoteric nature as undergo neutral n at respective -COO- or -NH3+ grp - as acid: -NH3+ grp responsible for acidic properties (reversible rxn) - as base: -COO- grp responsible for basic properties (reversible rxn)

Describe amino acid zwitterion in aqueous solution

- can act as buffer sol n 1. on add n small amt H+, - added H+ removed => [H+] slightly changed so pH fairly constant 2. On add n small amt OH- - added OH- removed => [OH-] slightly changed so pH fairly constant

Describe behaviour of amino acids in solutions of different pH

- can exist in diff form depending on pH of sol n - fr low to high pH, can exist as cationic (fully protonated) to (electrically) neutral to anionic - fully protonated form is acidic in nature & can b titrated w base

How to approach questions dealing with amino acids and multiple pKa values?

1. Assign pKa values to each acidic/basic grp - relevant to groups in protonated form (eg for -NH2, pKa value refer to that of -NH3+) - if got 2 identical grp, infer which hv lower pKa value (stronger acid) Eg. W 2 -COOH grp, the one nearer to -NH2 hv lower pKa value as it is stronger acid (bcos -NH2 is e-withdraw grp) 2. For each grp, compare pH of sol n w its pKa to determine form of gro at that pH - if pH of sol n < pKa, grp is protonated (eg -COOH/ -NH3+) - if pH of soo n > pKa, grp is deprotonated (eg -COO-/ -NH2)

How are peptide linkages formed? Describe

By condensat n rxn of amino acids w other amino acid molecules Resultant molecule aka peptide, each amino acid unit within peptide aka amino acid residue Warning: Form n peptide bonds occur in nature under SPECIFIC condit n. Peptide bond CANNOT b formed in lab by simply reacting amine & -COOH grp (bcos in lab, undergo neutral n)

Describe peptides

- contains 2 or more α-amino acids linked by peptide bonds => 2 amino acids joined tgt: dipeptide (contain 1 peptide bond) => 3 amino acids joined tgt: tripeptide (contain 2 peptide bond) => many amino acids joined tgt: poly peptide - polypeptide containing > 400 amino acid residue r termed proteins - protein can contain up to 400 amino acid residue. Diff protein contain diff sequence of amino acid residue

Name reagent, condition for complete hydrolysis of proteins

R&C: [acidic] HCl(aq)/H2SO4(aq) or [basic] NaOH(aq), prolonged heat under reflux NOTE: - acidic hydrolysis form RCOOH + amine salt - basic hydrolysis form RCOO- + amine

Nitrogen Compounds Flashcards

(39 cards)