1
Q
Name the overhead components?
A
- Catenary Wire
- 1500 Volt Feeders
- Contact Wire
- Droppers
- Dropper Feeders
- Jumper Feeders
- Guy Wires
2
Q
What power supply feeds into the substations?
A
22000v AC
3
Q
Define the purpose of a terminal stop sign?
A
15m from the point the pantograph would leave the contact wire and driver must stop 3m prior to the terminating sign.
4
Q
How far is the driver to stop from a Terminal Stop Sign?
A
3m
5
Q
What are some defects that can occur in the overhead system?
A
6
Q
Where do tramway crossings exist?
A
7
Q
Who should a driver report overhead defects to?
A
Train Controller
Signals & Safe Working
flashcards
Decks in class (34)
# Cards
-
Two position signals27
-
Three Position Signals57
-
Hand Signals14
-
Automatic Block System (ABS)5
-
Automatic And Track Control7
-
Track Force Protection22
-
Route Indicators7
-
Automatic Train Stops6
-
Signal Diagrams5
-
Exceptions To Pass Fixed Signals ABS13
-
Exceptions To Pass Fixed Signals ATC System12
-
Identifying And Dealing With Signal Irregularities13
-
Signals Out Of Use3
-
Multiple signals4
-
Special speeds10
-
Level Crossings And Track Side Signs16
-
Train Authority Procedures9
-
Dual Control Point Machines13
-
Electro-Hydraulic Point Machines EHPM10
-
Setting Back Trains12
-
Things To Remember102
-
ABS Train Disabled23
-
ABS Derailed Or Obsructed3
-
Melbourne Underground Rail Loop33
-
Murl Disabled, Derailed, Obstructed11
-
Single Line Working10
-
Single Line Working Disabled or Obstructed6
-
Adverse Weather Risks7
-
Hand Operated Siding Gates6
-
Siding operations14
-
Train evacuations8
-
Observing Train Following Safely5
-
Overhead Components & Procedures7
-
Absolute Block Working7
