Static vs dynamic lung vol.?
Static – lung vol. when no air is flowing (measured in L)
Dynamic –> Dependent on the rate of air flow (Measured against time –> L/min)
What are gas flow measurement devices called?
Pneumotachometers
Spirometer?
ANy device used to measure lung vol.
Define the following + write their volumes:
- Tidal vol.
- Inspiratory reserve vol.
- Expiratory reserve vol.
- Residual vol.
Max. vol. of air that can be inhaled and exhaled
VC = 4.8 L
(= tidal vol.+ IRV+ ERV = 0.5+3.1+1.2 = 4.8 L)
Max. volume of air that can be inhaled
IC = Tidal vol. + IRV = 0.5 + 3.1 = 3.6 L)
Vol. of air that remains in the lungs during normal respiration
FRC = ERV + residual vol. = 1.2+1.2 = 2.4 L
Total vol. of air that the lungs can hold
– sum of all volumes
= 6L
Define the following:
PIF
PEF
FVC
FEV1
%FVC in 1 sec.
What principle do bellow/bell/water spirometers work on?
Volume displacement
explain how inspiration and expiration affect the wokring of the following:
– Water bell spirometer
– Bellows spirometer
– Water bell spirometer::
Expiration – pressure inside bell rises above atm. P. causing bell to rise
Inspiration – pressure inside bell decreases below atm. P. causing bell to drop
– Bellows spirometer::
Expiration – air exhaled causes bellow to inflate
Inspiration – air inhaled causes bellow to collapse
Results from both these machines are plotted – kymography
What would the highest point on a volume time graph represent?
The forced vital capacity (FVC)
What is a good indicator of:
- Lung function
- Airway resistance
Give examples of and explain how obstructive and restrictive diseases would affect the following:
- Elasticity
- Compliance
- FEV1
- FVC
- FEV1/FVC
- FEF (20-75)
Obstructive – COPD (chronic bronchitis, emphysema), asthma – arent able to exhale air due to decreased elastic recoil
Restrictive – Pulmonary fibrosis, RIGID TB – due to decreased compliance - arent able to inhale a large vol. of air
What difference does a pneumotachometer measure?
A difference in air-flow pressure before and after passing thru a resistance screen
Flow-volume loops tells us whether _______________________
Flow-volume loops tells us whether airflow
is appropriate for a particular lung volume
When does max inspiratory flow (peak inspiratory flow - PIF) occur on a flow-volume loop?
Occurs halfway between Total lung capacity (TLC) and Residual volume (RV)
Max insp flow occurs half-way between TLC & RV
Why does PIF occur at this point?
The following factors are involved:
a) force generated by inspiratory muscles as lung volume
b) lung recoil as volume
c) airway resistance
a – force generated decreases as lung vol increases
b – Lung recoil increases as vol increases
c – airway resistance decreases
What law is whole body plethysmography based on? Can you measure true lung vol. thru this?
Boyle’s law
P1V1 = P2V2
Yes you can.
Ideal Peak flow meter readings for a young male?
approx. 580L/min for a young male
Importance of FRC at rest
- Index of ________
- If chest muscles weak FRC _______
- If airway is obstructed FRC ______
Can FRC be measured using spirometry?
no
Techniques to measure FRC
-Nitrogen washout ::: done by breathing in 100% O2