Single Engine Failure

Question 1

ENG FAILURE Caution SYS 1/2

Answer 1

1. OEI flight conditions- Establish
2. Affected engine - Identify
3. Single Engine EMRG shutdown - Perform:
   
   • ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 2

SINGLE ENGINE EMERG SHUTDOWN in flight

Answer 2

1. ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 3

SINGLE ENG FAILURE in flight

Answer 3

1. OEI flight conditions - Establish
2. Affected engine - Identify
3. Single engine EMRG shurdown - Perform:
   
   • ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 4

SINGLE ENGINE FAILURE during HIGE

Answer 4

1. Collective lever - Adjust to maintain rotor RPM
2. Landing attitude - Establish
3. Collective lever - Raise as necessary to stop descent/cushion landing

After landing
3. Affected engine - Identify
4. Single engine EMRG shutdown - Perform:
- ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 5

SINGLE ENGINE FAILURE during HOGE

Answer 5

1. Airpseed - Increase if possible
   Simultaneously
2. Collective lever - Adjust to maintain rotor RPM

If forced landing required
3. Landing attitude - Establish
4. Collective lever - Raise as necessary to stop/cushion landing

After landing
5. Affected engine - Identify
6. Single engine EMRG shutdown - Perform:
- ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 6

SINGLE ENGINE FAILURE TAKEOFF

Answer 6

1. Collective Lever - Adjust to maintain rotor RPM

If transitioning to OEI flight
2. Collective lever - Adjust to OEI limits or below
3. Airspeed - Gain, 65KIAS

After reaching safe altitude
4. Collective lever - Reduce to OEI MCP or below
5. Affected engine - Identify
6. Single Engine EMRG shutdown - Perform:
- ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

If performing a rejected takeoff
2. Landing attitude - Establish
3. Collective lever - Raise as necesscary to stop/cushion landing

After landing
4. Affected engine
5. Single Engine EMRG shutdown - Perform:
- ENG MAIN sw (confirm correct ENG) - IDLE, check indications, then OFF

Question 7

Single ENG EMRG Shutdown - On the ground

Answer 7

1. ENG Main sw - IDLE, check indications, OFF

If ENG is still running
2. Twist grip - OFF

If ENG is still running
3. EMRG OFF pb - PRESS