What is the title of the Jacksonville Fire and Rescue Department’s SOG 442?
Incident Safety Officer (ISO).
What is the primary purpose of JFRD SOG 442?
To provide guidelines for the duties, responsibilities, and utilization of the Incident Safety Officer (ISO).
SOG 442 for the Incident Safety Officer is designed to fulfill or exceed standards from NFPA, OSHA, and which other federal directive?
Homeland Security Presidential Directive (HSPD) 5.
The JFRD’s ISO guideline is written to fulfill or exceed NFPA 1500 and which other key NFPA standard related to the Safety Officer role?
NFPA 1521, Standard for Fire Department Safety Officer.
The use of an ISO is intended to increase the effectiveness of the _____ in protecting personnel on scene.
Incident Commander (Command)
According to SOG 442, who is responsible for the overall scene management and the safety of all assigned personnel?
The Incident Commander (Command).
Under what specific condition does the Incident Safety Officer (ISO) have the authority to immediately stop, alter, or suspend activities?
When emergency activities are judged by the ISO to pose an imminent threat to personnel.
After taking action to mitigate an imminent threat, what must the ISO do immediately?
Inform the Incident Commander (Command) of the actions taken.
If an ISO identifies an unsafe operation that does NOT pose an imminent threat, what is the first action they must take?
Notify the Incident Commander (Command).
In the absence of a District/Battalion Chief or JFRD ISO at a training event, who is responsible for overall scene management and safety?
The Company Officer.
What is the stated responsibility of all JFRD personnel regarding unreasonable hazardous risks?
To recognize, mitigate, and/or eliminate them.
What is the first step a JFRD member must take when they encounter a hazard at an incident?
Report it to their Company Officer or supervisor.
If a Company Officer is unable to mitigate a reported hazard, to whom must they report it?
The Incident Safety Officer (ISO).
Once the ISO is notified of a hazard that a Company Officer could not mitigate, what is the ISO’s responsibility?
To notify Command and coordinate the correction, mitigation, or elimination of the hazard.
According to JFRD response guidelines, who will typically assume the position of Incident Safety Officer?
The second arriving Suppression Chief.
An Incident Safety Officer (ISO) shall be initially dispatched on all incidents that require a response of _____ or more units.
five
Name three types of incidents that require the initial dispatch of an ISO.
Structure fires, vehicle extrications, hazmat incidents, USAR/Technical Rescue incidents, or any other significant incidents.
Under what circumstances may additional ISOs be assigned to an incident?
When the scene becomes too complex or too large for one ISO to safely manage.
When Assistant ISOs are assigned to an incident, how are they typically designated?
They are designated Safety 2, Safety 3, etc.
What level of authority does an Assistant ISO have compared to the primary ISO?
They have the same authority as the ISO.
If an incident requires a specialty response team like Haz Mat, and the responding ISO lacks certification, what action must Command take?
Command shall appoint a qualified team member to act as an ISO.
Under what condition should an ISO self-dispatch to an incident?
If the communicated information suggests a difficult or significant incident.
SOG 442 is designed to meet the requirements of OSHA Title 29 CFR 1910.120, which relates to what type of operations?
Hazardous Waste Operations & Emergency Response (HAZWOPER).