Unit 16 Basic Construction

Question 1

R-value refers to
A resistance to the transfer of heat.
B resistance to termite infestation.
C reduction in construction costs.
D high-end residential zoning.

Answer 1

A resistance to the transfer of heat.

Question 2

Pressure-treated lumber is used
A to improve the appearance of a home.
B to help prevent termite infestation.
C to increase the R-value.
D for moisture resistance in bathrooms.

Answer 2

B to help prevent termite infestation.

Question 3

The vertical framing member of a wall is a
A sole plate.
B girder.
C joist.
D stud.

Answer 3

D stud.

Question 4

Based on the cost per square foot of living space, which of the following is the MOST economical house design?
A Split-level
B One-story
C Two-story
D Tri-level

Answer 4

C Two-story

Question 5

BTUs
A measure heat.
B describe insulation value.
C determine roof slope.
D are a description of a window style.

Answer 5

A measure heat.

Question 6

The foundation wall rests on top of the
A footing.
B sill.
C girder.
D floor joist.

Answer 6

A footing.

Question 7

A certificate of occupancy is required
I from the local building department.
II before anyone can move into a home.
A I only
B II only
C Both I and II
D Neither I nor II

Answer 7

C Both I and II

Question 8

The lowest wooden part of residential construction is the
A sill.
B foundation wall.
C footing.
D ridge board.

Answer 8

A sill.

Question 9

The highest part of the frame construction is the
A soffit.
B rafter.
C ridge board.
D ceiling joist.

Answer 9

C ridge board.

Question 10

The following are components of an eave EXCEPT
A the soffit.
B the fascia board.
C the header.
D the frieze board.

Answer 10

C the header.