What is the purpose of a security inspection? Mark all that apply.
a. Advise
b. Assist
c. Help
d. Teach
a. Advise
b. Assist
c. Help
d. Teach
What is an approved temporary, short-term exclusion, or deviation from an information security standard or requirement?
a. Waiver
b. Best Practice
c. Evaluation
d. Exception
a. Waiver
What is an approved permanent exclusion or deviation from an information security standard or requirement?
a. Waiver
b. Best Practice
c. Evaluation
d. Exception
d. Exception
A quick look at the fence reveals that it is made of chain-link fabric and is topped with an outward facing outrigger set at a 45-degree angle. Does this represent a security concern?
a. Yes
b. No
b. No
An outward facing outrigger set at a 45-degree angle meets the requirement.
You measure the height of the perimeter fence and find that it is six feet tall. Is this fence constructed to the appropriate height?
a. Yes
b. No
b. No
As you make your way around the facility perimeter, you notice that one of the signs is so dirty that it is illegible. Does this represent a security concern?
a. Yes
b. No
a. Yes
These signs are spaced at 150-foot intervals, around the installation perimeter.
Does this meet the requirement outlined in the Ft. Bravo Physical Security Plan (PSP)?
a. Yes
b. No
b. No
Not exceeding 100ft intervals
You measure the mesh of the chain link and find that the fence is constructed from nine-gauge steel woven into a two-inch diameter diamond mesh. Is this fence’s fabric constructed to the appropriate diameter diamond mesh?
a. Yes
b. No
a. Yes
The gate house is a small structure positioned between the facility’s entry and exit lanes.
Drop gates block the lanes in each direction, and cement barriers direct traffic toward the gate house. The gate house has two doorways, windows facing the three directions, entry point lighting, and video surveillance system (VSS) cameras positioned to view entering traffic.
According to this facility’s PSP, are all required security elements present?
a. Yes
b. No, there are insufficient VSS cameras
c. No, entry point lighting is insufficient
d. No, the drop gate is insufficient
b. No, there are insufficient VSS cameras
Must have VSS cameras on entry and exit.
Perimeter emergency lighting is required around a nuclear weapons storage area.
What attribute must perimeter lighting elements possess in order to fulfill the emergency lighting requirement?
a. Lights must be programmable to turn on at timed intervals
b. Lights must have instant restrike capability
c. Lights must be connected to a motion-sensitive trigger
d. Lights must use bulbs that have a burn life of at least 3000
b. Lights must have instant restrike capability
You measure the height of the perimeter fence and find that it is seven feet tall. Is this fence constructed to the appropriate height?
a. Yes
b. No
a. Yes
The fence must be seven feet tall.
Upon further examination, you note that both the interior and exterior fences are topped with a 15-inch Y outrigger. Is there a problem with the outrigger?
a. Yes, the 15-inch outrigger length is insufficient
b. Yes, a 15-inch Y outrigger is unnecessary for both the interior and exterior fences
c. No, there are no problems. Nuclear Weapon Storage facilities require both interior and exterior fences to be topped with a 15-inch Y outrigger
c. No, there are no problems. Nuclear Weapon Storage facilities require both interior and exterior fences to be topped with a 15-inch Y outrigger
You measure the mesh of the chain link and find that the fence is constructed from nine-gauge steel woven into a two-inch diameter diamond mesh. Is this fence’s fabric constructed to the appropriate diameter diamond mesh?
a. Yes
b. No
a. Yes
You measure the distance from the fence bottom to the ground and find a space of three inches. Anchors are spaced at a distance that allows an opening of five inches to be created by lifting the fence. Does this fence meet DOD requirements for ground clearance and fence anchor spacing?
a. Yes
b. No
b. No
Measuring the clear zones shows 12 feet between the exterior and interior fences, and a clear zone of 30 feet beyond the exterior fence. No vegetation is present. Do the clear zones comply with requirements?
a. Yes
b. No
b. No
The clear zone between the exterior and interior fences must be 30 feet.
These signs are spaced at 200-foot intervals around the facility perimeter. Does this meet the requirement for nuclear weapons storage areas?
a. Yes
b. No
b. No
not exceeding 100 feet.
You return to the front of the area and examine the vehicle entry gate. The gate does not have a sign on it. Does this represent a security concern?
a. Yes
b. No
a. Yes
The exterior gate opens and a guard waves the vehicle in. The vehicle drives into the entrapment area and stops just before the interior gate. The exterior gate closes. The guard approaches the vehicle, walks around it to examine it, and checks the driver’s ID. The guard then says, “Vehicle cleared for entry!” The interior gate opens, the vehicle drives into the nuclear weapons storage area and the gate closes behind it. What gate entry system did you just observe being employed?
a. Phase security check-in
b. Security-in-depth
c. Dual fence
d. Continual barrier
d. Continual barrier
You enter the entrapment area, considering entry procedures for secure AA&E areas. A guard approaches and asks, “Are you here for the inspection?” You reply “Yes” and provide your name. The guard responds, “Mr. Phillips has your name listed on the Access Roster. Here is your visitor pass; please return it upon leaving.” You then proceed to enter the secure area with your visitor pass, inspection checklist, government issued ID, and vehicle. Are there any problems with this entry control procedure?
a. Yes, the guard failed to request your government issued ID
b. Yes, the guard failed to request and retain your government issued ID prior to issuing the visitor’s pass
c. No, there are no problems
b. Yes, the guard failed to request and retain your government issued ID prior to issuing the visitor’s pass
An internal locking device is used to secure the bunker doors. Is this locking mechanism approved for use on nuclear weapons storage area bunkers?
a. Yes
b. No
a. Yes
What capability does the VSS demonstrate? Mark all that apply.
a. Detect
b. Delay
c .Deny
d. Deter
e. Document
a. Detect
b. Delay
c .Deny
d. Deter
e. Document
Guard: “Good morning, may I see your ID?”
What access control measure did you just observe being implemented?
a. Physical
b. Comprehensive
c. Automated
d. Randomized
a. Physical
Which of the following methods should be used to validate the placement of your Intrusion Detection System (IDS) sensors?
a. Acceptance/walk test
b. Nuisance alarm test
c. Premise Control Unit (PCU) test
a. Acceptance/walk test
While conducting an acceptance test of your IDS sensors, you notice there are several dead zones. What should you do?
a. Adjust the placement of other sensors to cover any dead zones
b. Dead zones are areas that will not trigger an alarm, are common, but serve no threat
c. Reset the uninterruptible power supply (UPS)
a. Adjust the placement of other sensors to cover any dead zones
