CDCs > Volume 2 URE > Flashcards

Volume 2 URE Flashcards

(88 cards)

Study These Flashcards
1
Q
  1. (201) The materiel management system uses which issue request code to select the correct internalprogram to process an input transaction?
    a. Transaction identification code (TRIC).
    b. Transaction exception (TEX) code
    c. Issue exception (IEX) code.
    d. System designator.
A

a.Transaction identification code (TRIC).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
2
Q
  1. (201) What one-position alpha code is used to indicate how the materiel management systemaccumulates demand data for stock leveling and due-in from maintenance (DIFM) control?
    a. Demand code.
    b. Transaction code.
    c. Force Activity Designator.
    d. Urgency justification code.
A

a.Demand code.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
3
Q
  1. (201) Organizations may identify their issue requests to base supply using either a
    a. stock number or commercial and government entity (CAGE) number.
    b. part number or transportation control number (TCN) number.
    c. part number or document number.
    d. stock number or part number.
A

d.stock number or part number.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
4
Q
  1. (201) What letter is entered in position 8 on the AF Form 2005 for a part number request?
    a. X.
    b. R.
    c. B.
    d. P.
A

d.P.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
5
Q
  1. (201) What is the next step in the ordering process after gathering and documenting data on the AFForm 2005?
    a. Enter data into materiel management system.
    b. Review management notices for availability.
    c. Increase the cost of priority requirements.
    d. Reduce the number of supply transactions.
A

a.Enter data into materiel management system.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
6
Q
  1. (202) What may be produced after processing an order request that notifies further actions arerequired?
    a. Inquiry.
    b. History.
    c. Management notice.
    d. Stock control levels.
A

c.Management notice.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
7
Q
  1. (202) Which management notice is the result of issue processing and reflects issue, kill, orbackorder quantity status?
    a. I004.
    b. I005.
    c. I007.
    d. I023.
A

a.I004.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
8
Q
  1. (202) An I007 management notice is produced when a?
    a. part number request can be converted to a single stock number under program control.
    b. part number request cannot be converted to a stock number under program control.
    c. stock number request can be converted to multiple part numbers.
    d. stock number request cannot be converted to a part number.
A

b.part number request cannot be converted to a stock number under program control

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
9
Q
  1. (202) What transaction exception code is used to reprocess an issue request when the customer requests a backorder?
    a. 1.
    b. 2.
    c. M.
    d. P.
A

c.M.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
10
Q
  1. (203) Which base-wide organization uses the Integrated Maintenance Data System Central Database (IMDS CDB) to interface with materiel management system?
    a. Base supply.
    b. Maintenance.
    c. Civil engineering.
    d. Vehicle maintenance.
A

b.Maintenance.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
11
Q
  1. (203) What materiel management system output notifies the Integrated Maintenance Data System Central Database (IMDS CDB) of changes in due-out status?
    a. DUO.
    b. 1SH.
    c. CSU.
    d. ISU.
A

b.1SH.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
12
Q
  1. (203) When the materiel management system detects an Integrated Maintenance Data System Central Database (IMDS CDB) transaction error, the image is
    a. deleted from IMDS CDB.
    b. returned to IMDS CDB.
    c. forwarded to supply interface file system (SIFS).
    d. returned to SIFS.
A

b.returned to IMDS CDB

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
13
Q
  1. (204) What Air Force Sustainment Center (AFSC) entity is responsible for mission capable (MICAP) management?
    a. Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Weapon System Support Activity (WSSA).
    b. Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Stock Control Activity.
    c. Source of Supply.
    d. Base level.
A

a.Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Weapon System Support Activity (WSSA).

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
14
Q
  1. (204) When spares support is required, the Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Weapon System Support Activity (WSSA) is the primary interface for the
    a. EME.
    b. LRS.
    c. SOS.
    d. MAJCOM.
A

b.LRS.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
15
Q
  1. (204) What response is sent to the materiel management computer system when a mission capable (MICAP) requisition is transmitted to the source of supply when assets are immediately available?
    a. Follow-up.
    b. Cancellation.
    c. Positive Status.
    d. Negative Status.
A

c.Positive Status.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
16
Q
  1. (204) Who confirms an end-item is not mission capable and verifies all local resources are exhausted prior to submitting a MICAP request?
    a. Logistics readiness squadron (LRS) base level.
    b. Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Weapon System Support Activity (WSSA).
    c. Source of supply (SOS).
    d. Air Force Materiel Command (AFMC).
A

a.Logistics readiness squadron (LRS) base level

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
17
Q
  1. (204) Who will the aircraft parts store (APS) or customer support liaison contact to verify a mission capable (MICAP) condition exists?
    a. Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Stock Control Activity.
    b. Air Force Materiel Command Supply Chain Management-Retail (AFMC SCM-R) Quality Control Activity.
    c. Maintenance production superintendent.
    d. Source of supply.
A

c.Maintenance production superintendent.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
18
Q
  1. (204) What information needs to be aggressively monitored and updated on a mission capability (MICAP) requirement?
    a. Status.
    b. Follow-up.
    c. Cause code.
    d. Delete code.
A

a.Status.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
19
Q
  1. (204) What mission capability (MICAP) report (DIC B9*) code identifies the reason for terminating a MICAP condition?
    a. Reason why.
    b. Report
    c. Delete.
    d. Cause.
A

c.Delete.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
20
Q
  1. (205) What is processed in the materiel management system to satisfy a mission capability(MICAP) condition and allow MICAP reporting to be initiated?
    a. Status
    b. Cancellation.
    c. Due-out.
    d. Due-in.
A

d.Due-in.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
21
Q
  1. (205) What transaction can be processed on an existing requisition that will initiate mission capability (MICAP) reporting?
    a. Upgrade.
    b. Downgrade.
    c. Follow-up.
    d. Cancellation.
A

a.Upgrade.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
22
Q
  1. (205) What output is produced to report the applicable change of a mission capable (MICAP) condition each time transaction NOR is processed?
    a. MICAP status report (E40).
    b. MICAP report (B9).
    c. MICAP report (NOR).
    d. MICAP report (D9    ).
A

b.MICAP report (B9*

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
23
Q
  1. (205) Y-type details are internally established and maintained in the supply computer for how many days after a mission capability (MICAP) termination?
    a. 30.
    b. 45.
    c. 60.
    d. 90.
A

d.90.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
24
Q
  1. (206) What transaction identification code (TRIC) is processed to end the repair cycle process?
    a. DOC.
    b. DOR.
    c. ISU.
    d. TIN.
A

d.TIN.

How well did you know this?
1
Not at all
2
3
4
5
Perfectly
25
25. (206) Which activity is responsible for providing repair cycle support with new status and location for a due-in from maintenance (DIFM) detail? a. Logistics readiness squadron (LRS). b. Source of supply (SOS). c. Maintenance. d. Customer support.
c.Maintenance.
26
26. (206) What transaction identification code (TRIC) is used to process the updated status and location for a due-in from maintenance (DIFM) record? a. DOC. b. DFM. c. ISU. d. SPR.
b.DFM.
27
27. (206) Which listing is used to perform the due-in from maintenance (DIFM) reconciliation? a. D19. b. D20. c. D23. d. Q04.
c.D23.
28
28. (206) What is the purpose of performing a due-in from maintenance (DIFM) reconciliation between the logistics readiness squadron (LRS) and the maintenance activities? a. Ensure maintenance activities physically have all the DIFM items. b. Ensure a replacement request is submitted to LRS. c. To load a multiple DIFM flag indicator to the item record. d. To inventory all expendable items in stock.
a.Ensure maintenance activities physically have all the DIFM items.
29
29. (207) Within how many duty days from the date of issue will a due-in from maintenance (DIFM) item that was not inducted into maintenance repair be returned to the LRS? a. 2. b. 4. c. 10. d. 30.
b.4.
30
30.(208) How are time compliance technical order (TCTO) items identified on the item record? a.Other assets indicator 5. b.Other assets indicator 4 .c.Numeric parts preference code (NPPC) 5. d.Numeric parts preference code (NPPC) 4.
d.Numeric parts preference code (NPPC) 4.
31
31. (208) What condition tag is used to label a time compliance technical order (TCTO) item that was modified and returned from the maintenance function? a. DD Form 1574 (Yellow tag). b. DD Form 1575 (Brown tag). c. DD Form 1576 (Orange tag). d. DD Form 1577 (Gray tag).
a.DD Form 1574 (Yellow tag).
32
32. (208) What is entered in the “remarks” block of the DD Form 1574 (yellow tag)? a. Time compliance technical order (TCTO) number. b. Time compliance technical order (TCTO) flag. c. Quality control flag. d. Quality control number.
a.Time compliance technical order (TCTO) number.
33
33. (209) What code is used on a turn-in request for DIFM item indicating what actions were taken by maintenance and logistics readiness squadron (LRS)/materiel management activity? a. Demand. b. Action taken. c. Issue exception. d. Mission capable (MICAP) delete.
b.Action taken.
34
34. (209) Which action taken code indicates an item is condemned? a. F. b. 1. c. 9. d. A.
c.9.
35
35. (209) What will the materiel management information technology system scan for in its internal records after an item was repaired and turned in as serviceable? a. Due-outs. b. Due-ins. c. Follow ups. d. Cancellation.
a.Due-outs.
36
36. (209) Where are serviceable condition returns forwarded after a “notice to stock” document is received? a. Source of supply (SOS). b. Defense Logistics Agency Disposition Service (DLADS). c. Return to customer. d. Appropriate storage facility.
d.Appropriate storage facility.
37
37.(209) What is produced after processing an unserviceable turn-in for an asset that cannot be repaired at base level? a.Shipment document. b.Notice to stock document .c.DOR. d.ISU.
a.Shipment document.
38
38. (210) Time change assets are replaced on what type of schedule? a. Daily or weekly. b. Daily or hourly. c. Calendar or monthly. d. Calendar or hourly.
d.Calendar or hourly.
39
39. (210) Who appoints the time change manager? a. First sergeant or equivalent. b. Director of operations or equivalent. c. Materiel management flight chief or equivalent. d. Materiel management supervisor or equivalent.
c.Materiel management flight chief or equivalent.
40
40. (211) Failure to process turnaround (TRN) data in a correct and timely manner results in reduced base stock levels and incomplete reports from which buy, repair, and distribution decisions are made by a. Headquarters Air Force Materiel Command (HQ AFMC). b. Cataloging and Standardization Office (CASO). c. Government Services Administration (GSA). d. Defense Logistics Agency (DLA).
a.Headquarters Air Force Materiel Command (HQ AFMC).
41
41. (211) Which update is prepared and processed by repair cycle support (RCS) to update demand data on the item record and repair cycle data on the repair cycle record? a. Calibration. b. Turnaround. c. Repair cycle. d. Cannibalization.
b.Turnaround
42
42. (211) Where does Supply obtain data used to process turnaround transactions? a. Department of Defense (DD) Form 1348–1A, Issue release/receipt document. b. Air Force technical order (AFTO) Form 350, Reparable Item Processing Tag. c. Air Force (AF) Form 2005, Issue/Turn-in Request. d. I122 management notice.
d.I122 management notice.
43
43. (212) Which management notice is produced reflecting stock awaiting disposition instructions after an unserviceable turn-in process? a. I004. b. I007. c. I012. d. I023.
c.I012
44
44. (212) What transaction identification code (TRIC) is not an option for processing after dispositions instructions for an unserviceable asset has been received? a. ISU. b. TRM. c. MSI. d. SHP.
a.ISU.
45
45. (213) Who maintains ownership of supply point assets until they are used? a. Logistics readiness squadron (LRS). b. Source of supply (SOS). c. Maintenance. d. Equipment element.
a.Logistics readiness squadron (LRS)
46
46. (213) Which transaction identification code (TRIC) is used to load, change, or delete supply point details? a. MSI. b. ISU. c. FSP. d. DFM.
c.FSP
47
47. (213) Which listing is used to verify balances during a supply point reconciliation? a. D04. b. Q13. c. R14. d. S07.
b.Q13.
48
48. (213) What transaction identifier code (TRIC) is processed when the on-hand quantity is less than the authorized quantity after a supply point reconciliation? a. DOC. b. DOR. c. ISU. d. SPR.
c.ISU.
49
49. (214) Who will continuously monitor requirements supporting Air Force war plans and ensure the validity of all war reserve materiel (WRM) requirements? a. Bases. b. Source of supply. c. MAJCOMs. d. AFMC.
c.MAJCOMs
50
50. (214) Who is responsible for physical materiel handling, receiving, storing, and processing of war reserve materiel (WRM) shipment requests? a. Bases. b. Source of supply. c. Major commands (MAJCOMs). d. Air Force Materiel Command (AFMC).
a.Bases.
51
51.(214) Which Basic Expeditionary Airfield Resources (BEAR) system includes facilities, equipment, and supplies necessary to establish and support aircraft flight-related operations and maintenance activities for an initial aircraft squadron deployed to a bare base location? a.Housekeeping support .b.Industrial operations. c.Initial flightline. d.Follow-on flightline.
c.Initial flightline.
52
52. (214) Which Basic Expeditionary Airfield Resources (BEAR) system includes facilities, equipment, and supplies necessary to establish and support flight operations and maintenance needs for a second and subsequent squadrons deployed to an austere base? a. Housekeeping support. b. Industrial operations. c. Initial flightline. d. Follow-on flightline.
d.Follow-on flightline
53
53. (214) Mobility readiness spares package (MRSP) assets are designed to allow support of a weapon system in a deployed location for how many days before resupply is necessary? a. 30. b. 60. c. 90. d. 120.
b.60.
54
54. (214) Who will authorize allocation of readiness spares packages (RSP) to specific units/bases? a. Logistics readiness squadron (LRS). b. Source of supply (SOS) c. Major command (MAJCOM). d. Air Force Materiel Command (AFMC).
c.Major command (MAJCOM)
55
55. (214) What transaction identification code (TRIC) is used to load the serial number/control record for readiness spares package (RSP) authorizations? a. ISU. b. MSI. c. 1EB. d. 1UB.
c.1EB.
56
56.(214) In the master file, what format is readiness spares package (RSP) data authorization input records received from the major command (MAJCOM)? a.FKD .b.XSF. c.XVF. d.1EB.
c.XVF.
57
57. (214) What program performs the readiness spares package (RSP) reconciliation? a. Q05. b. S05. c. R07. d. S07.
b.S05.
58
58. (214) What process involves shelf life controls and other inspection functions for readiness spares package (RSP) assets? a. Total asset visibility (TAV). b. Supply interface file system (SIFS). c. Care of supplies in storage (COSIS). d. Difficulty report (DIREP).
c.Care of supplies in storage (COSIS).
59
59. (214) What transaction identification code (TRIC) is used to issue mobility readiness spares package (MRSP) assets to users? a. ISU. b. MSI c. 1EB. d. 1UB.
b.MSI
60
60. (214) What asset status flag reflects mobility readiness spares package (MRSP) assets are deployed? a. D. b. F. c. M. d. T.
a.D.
61
61. (214) The decision to transfer mobility readiness spares package (MRSP) accountability rests with the host and the a. losing accountable officer. b. losing major command (MAJCOM). c. gaining major command (MAJCOM). d. gaining accountable officer.
c.gaining major command (MAJCOM).
62
62. (214) What transaction identification code (TRIC) do you use to transfer mobility readiness spares package (MRSP) accountability? a. FKD. b. FME. c. 1EB. d. 1WD.
d.1WD.
63
63. (214) What transaction identification code (TRIC) is used to transfer assets between mobility readiness spares packages (MRSP) and war reserve materiel (WRM) detail records? a. DOR. b. ISU. c. 1EB. d. 1KT.
d.1KT.
64
64. (214) What action code is used when transferring multiple quantities from a mobility readiness spares package (MRSP) or war reserve materiel (WRM) detail record? a. A. b. B. c. M. d. S.
c.M.
65
65. (214) Which current listing/listings must be obtained prior to shipping out readiness spares package (RSP) assets? a. D04 and/or D20 b. M01 and/or M20 c. R14 and/or R15. d. R43 and/or R52.
d.R43 and/or R52.
66
66. (214) What wartime capability system is used to conduct wartime assessments? a. Readiness Assessment Module (RAM). b. Logistics Module-Base (LOGMOD-B) level. c. Sustainability Assessment Module (SAM). d. Personal Computer-Aircraft Sustainability Model (PC-ASM).
d.Personal Computer-Aircraft Sustainability Model (PC-ASM).
67
67. (214) What system is used to access the War Consumable Distribution Objective (WCDO)? a. Department of Defense (DOD) Readiness Reporting System (DRRS). b. Joint Contingency and Sustainment Processing System (JCSPS). c. Joint Acquisition CBRN Knowledge System (JACKS). d. Logistics Feasibility Analysis Capability (LOGFAC).
d.Logistics Feasibility Analysis Capability (LOGFAC
68
68. (214) Which listing provides a management product for special spares authorizations, assets, and products? a. Repair Cycle Asset Management Listing (D23) b. Daily Document Register (D04) c. Special Spares Report (R34). d. Consolidate Custody Receipt Listing (R23).
c.Special Spares Report (R34).
69
69. (215) The Air and Space Expeditionary Force (AEF) is structured and executed under three principles transparency, predictability, and a. reports. b. response. c. automatically. d. equitability.
d.equitability.
70
70. (215) Which of the following identifies the first three positions of a materiel management unit type code (UTC)? a. JFA. b. JFB. c. UFM. d. XFH.
b.JFB.
71
71. (215) What system captures unit type code (UTC) assessments, identifies suitable UTCs to satisfy taskings, and helps forecast shortfalls? a. Weapon System Management Information System (WSMIS). b. Logistics Module-base (LOGMOD-B) level. c. Air and Space Expeditionary Force (AEF) Unit Type Code (UTC) Reporting Tool (ART). d. Personal Computer–Aircraft Sustainability Model (PC–ASM).
c.Air and Space Expeditionary Force (AEF) Unit Type Code (UTC) Reporting Tool (ART).
72
72. (215) What code reflected in the operation plan (OPLAN) or time phased force deployment data (TPFDD) defines the number of passengers and/or amount of cargo that must be moved to meet a wartime tasking? a. Transaction identification code (TRIC). b. Time-phased deployment list (TPFDL). c. Controlled item code (CIC). d. Unit type code (UTC).
d.Unit type code (UTC).
73
73. (215) What was established as the sole readiness reporting system for the Department of Defense? a. Weapon System Management Information System (WSMIS). b. Mobility Readiness Reporting System (MRRS). c. Air and Space Expeditionary Force (AEF) Reporting Tool (ART). d. Defense Readiness Reporting System (DRRS).
d.Defense Readiness Reporting System (DRRS).
74
74. (216) What section stores small arms for mobility use? a. Storage element. b. Supply point element. c. Security forces element. d. Individual protective equipment element.
d.Individual protective equipment element.
75
75. (216) What number must be annotated on all documentation for small arms? a. Container. b. Model c. Serial. d. Load.
c.Serial.
76
76. (216) What Air Force (AF) Form will requesting individuals provide prior to being issued a weapon? a. AF Form 522. b. AF Form 931. c. AF Form 1297. d. AF Form 2005.
a.AF Form 522.
77
77. (216) Who must ensure that additional controls are exercised over all weapons movements, marshaling, and deployments at the deployed location? a. Resource advisor. b. Maintenance supervisor. c. Security forces. d. Accountable officer (AO) or commander.
d.Accountable officer (AO) or commander.
78
78.(216) At a minimum, how often are mobility assets inventoried? a.Weekly. b.Monthly .c.Quarterly. d.Annually.
d.Annually.
79
79. (216) Who performs warehouse validations prior to inventorying mobility assets? a. Individual protective equipment personnel. b. Inventory personnel c. Maintenance. d. Commander.
a.Individual protective equipment personnel.
80
80. (216) Which type mobility bag (MOBAG) contains cold weather equipment? a. A. b. B. c. C. d. D.
b.B.
81
81. (216) Which type mobility bag (MOBAG) contains chemical warfare defense equipment? a. A. b. B. c. C. d. D.
c.C.
82
82. (216) What is available to allow Individual Protective Equipment (IPE) element personnel to put away, redistribute, ship, and mange shipment discrepancies within Enterprise Solution-Supply (ES-S) Mobility? a. Mobility dashboards. b. Inventory planning. c. Shelf life forecast. d. Inventory count.
a.Mobility dashboards.
83
83. (216) Shelf life assets are tracked in ES-S Mobility by a. National stock number. b. Serial number. c. Contract/lot number. d. Part number.
c.Contract/lot number.
84
84. (216) What is used to determine bulk stock requirements and are the basis for placing mobility stock orders based on mission support requirements? a. Mobility shopping list. b. Mobility audit trail. c. Mobility stock details. d. Mobility item activity.
a.Mobility shopping list.
85
85. (216) Which function in Enterprise Solution-Supply (ES-S) Mobility gives Individual Protective Equipment (IPE) element personnel the ability to view and update customer information and manage assets currently in possession by customers? a. Issue items. b. View site details. c. Shelf life activities. d. Authorized quantities details.
a.Issue items.
86
86. (216) Which capability gives Individual Protective Equipment (IPE) element personnel the ability to check stock availability that is either on hand in mobility warehouse locations or in the possession of mobility customers? a. Mobility data query. b. Mobility work products. c. Property stock site. d. Property balance location.
a.Mobility data query.
87
87.(216) What information is entered when returning mobility items through Enterprise Solution-Supply (ES-S) Mobility? a.National stock number (NSN) .b.Issue document number. c.Warehouse badge number identification code. d.Electronic data interchange personal identifier (EDIPI).
d.Electronic data interchange personal identifier (EDIPI).
88
88. (216) What does Enterprise Solution-Supply (ES-S) Mobility asset management programmatically search for and detect in relation to gas masks? a. Rejected service life dates. b. Renewed service life dates. c. Expired service life dates. d. Extended service life dates.
c.Expired service life dates
CDCs
flashcards
Decks in class (12)
# Cards
Brainscape helps you reach your goals faster, through stronger study habits.
© 2026 Bold Learning Solutions. Terms and Conditions