What makes up the warning system?
What is inhibited during TO?
What is inhibited during Landing?
What is Message Inhibit?
Describe the Alert Message Inhibits.
What will trigger a TO CONFIG Warning?
Can only be silenced by retarding thrust levers or correcting condition.
If thrust is reduced msg remains for 10sec so to identify the problem.
What will trigger a LNDG CONFIG Warning?
Can you cancel an airspeed warning?
YES! by pressing master warning
GPWS MODES
EEAUBBW
1) . Excessive Sink Rate
2) . Excessive Terrain Closure
3) . Altitude loss after TO
4) . Unsafe terrain clearance floor not in LDG config
5) . Below GS
6) . Bank Angle
7) . Windshear
GPWS Mode Priority
7). Windshear
1). Excessive Sink Rate (“Sink rate pull up”)
2). Excessive terrain closure (“terrain, terrain pull up”)
Then
-Look ahead terrain
-Look ahead obstacle
-PWS Warning
When does PWS auto display on HSI?
BLW 1200ftAGL
PWS alert occurs
WX display is not selected by either pilot and
Respective HSI is in VOR,APP,MAP or CTR MAP mode
If both pilots are on TERRAIN mode and PWS alert occurs what happens
If there is not an active TERR alert then PWS replaces TERR.
Can be deselected by pushing TERR
Will you get a TCAS TA/RA if TFC is not selected ON?
Yes
What master warning cannot be silenced?
Landing config
Autopilot disc
Takeoff config
Overspeed
When will you get an ALT ALERT
Crew alertness monitor?
Cruise - advisory 35 min, caution 2 min later, warning 1 min after caution
Cruise to descent transition - advisory at TOD if no input for last 10 min, caution 2 min later, warning 1 min after caution
TERR WARNING - How long till impact?
TERR CAUTION
20-30sec
40-60sec
TOO LOW GEAR
Envelope penetrated Below 190 kts
TOO LOW TERRAIN
Envelope penetrated ABV 190kts
GLIDESLOPE GLIDESLOPE
Armed at 1000ft gear down
1.3 dots BLW GS
BANK ANGLE, BANK ANGLE
35 degrees
Windshear warning system armed
BLW 1500ft
Begins at rotation
Not armed on the ground
How does GPWS Windshear work? Does it need moisture?
-GPWS provides when an excessive downdraft or tailwind is occurring.
-Takes additional data from the stall warning computer and determines if decreasing performance
-Windshear conditions are occurring.
Does not need moisture
How does PWS work?
-Alerts when it detects disturbed air which contains moisture or particular matter ahead of the A/C