Fluid compressibility =
describes how the density of a fluid increases with increasing pressure
Incompressible =
volume doesn’t change no matter how much stress is applied
Density =
mass/volume
Rock compressibility =
describes how the porosity of a rock increases with increasing pressure
Porosity =
pore space/volume
/\density =
/\M / volume
For infinitesimal /\P, Cf =
1/density x d(density)/dP
/\porosity (/\n) =
/\pore space/volume
For infinitesimal /\P, Cr =
1/n x dn/dP
Concept of solving Cr = … or Cf = … for n and density
Relationship between h and n
h = w + z
where w = P/density x g
SO change h = change P = change n
Area x time x density x flow = (unit)
Mass M
Fluid mass per unit vol =
Mass conservation
/\x/\y/\x/\m = mass in - mass out
Finding equations for dm/dt, basic gist:
FIRST EQUATION
1. Mass conservation
/\x/\y/\x/\m = mass in - mass out
SECOND EQUATION
1. m = density x porosity
Fluid mass per unit vol (m) =
Density x porosity
Using equations for dm/dt to form an equation for the specific storage coefficient (and further steps)
Ssdh/dt = -d(qx)/dx - d(qy)dy - d(qz)/dz
Sdh/dt = d(Tx(dh/dx))dx + d(Ty(dh/dy))dy
Storativity (S) =
in confined aquifers
Volume of water released per unit area over entire aquifer thickness due to fall in potentiometric surface
(drop in P = drop in porosity and density)
S = vol/(A x /\h)
Specific yield (Sy) =
in unconfined aquifers
Volume of water released per unit area due to fall in water table elevation
(due to dewatering of pores as water table lowered)
Sy = vol/(A x /\h)
Substitutions for an unconfined aquifer
S = Sy
Tx = hKx
Ty = hKy
Unconfined aquifer Sy equation
Sydh/dt = d(hKx(dh/dx))dx + d(hKy(dh/dy))dy + W
W = aquifer recharge per unit area
Theis solution (1945) boundary and initial conditions:
h = he; r>=0; t=0
h=he; r–>infinity; t>0
2pirHqr=-Qw; r–>0; t>0
The Theis solution
s = he-h
= Qw/4piT x E(Sr^2/4Tt)
Jacob’s large time approximation
s ~= Qw/4piT [ln(4Tt/Sr^2) - 0.5772]
N.B. remember -ve log flip rule!
How does re grow with time? Basic gist