Chapter 5 Installing and Configuring

Question 1

1. Which voltage is applied to the paper to transfer the toner to the paper in an EP process
   laser printer?
   A. +600VDC
   B. –600VDC
   C. +6000VDC
   D. –6000VDC

Answer 1

A. +600VDC

Question 2

2. Which types of printers are referred to as page printers because they receive their print job
   instructions one page at a time? (Choose two.)
   A. Daisy-wheel
   B. Dot-matrix
   C. Inkjet
   D. Laser
   E. Thermal

Answer 2

C. Inkjet
D. Laser

Question 3

3. Which of the following is not an advantage of a Universal Serial Bus (USB) printer interface?
   A. It has a higher transfer rate than a serial connection.
   B. It has a higher transfer rate than a parallel connection.
   C. It automatically recognizes new devices.
   D. It allows the printer to communicate with networks, servers, and workstations.

Answer 3

D. It allows the printer to communicate with networks, servers, and workstations.

Question 4

4. Which type of printers can be used with multipart forms?
   A. Inkjet printers
   B. Laser printers
   C. Thermal printers
   D. Dot-matrix printers

Answer 4

D. Dot-matrix printers

Question 5

5. Which step in the EP imaging process uses a laser to discharge selected areas of the
   photosensitive drum, thus forming an image on the drum?
   A. Exposing
   B. Transferring
   C. Developing
   D. Cleaning

Answer 5

A. Exposing

Question 6

6. Which of the following is fed through an extruder on a 3D printer to create objects?
   A. Plastic
   B. Metal
   C. Filament
   D. Extrusion powder

Answer 6

C. Filament

Question 7

7. What voltage does the corona wire or corona roller hold?
   A. +600VDC
   B. –600VDC
   C. 0VDC
   D. –100VDC

Answer 7

A. +600VDC

Question 8

8. Which device in an inkjet printer contains the print head?
   A. Toner cartridge
   B. Ink cartridge
   C. Daisy wheel
   D. Paper tray

Answer 8

B. Ink cartridge

Question 9

9. What is the correct order of the steps in the EP imaging process?
   A. Developing, exposing, transferring, fusing, charging, cleaning, processing
   B. Charging, processing, exposing, developing, transferring, fusing, cleaning
   C. Processing, transferring, exposing, developing, charging, cleaning, fusing
   D. Processing, charging, exposing, developing, transferring, fusing, cleaning

Answer 9

D. Processing, charging, exposing, developing, transferring, fusing, cleaning

Question 10

10. Most printers that use the electrophotographic process contain how many standard
    assemblies?
    A. Five
    B. Six
    C. Four
    D. Nine

Answer 10

D. Nine

Question 11

11. What is typically included in the EP laser printer toner cartridge? (Choose three.)
    A. Toner
    B. Print drum
    C. Laser
    D. Cleaning blade

Answer 11

A. Toner
B. Print drum
D. Cleaning blade

Question 12

12. What happens during the developing stage of laser printing?
    A. An electrostatic charge is applied to the drum to attract toner particles.
    B. Heat is applied to the paper to melt the toner.
    C. The laser creates an image of the page on the drum.
    D. An electrostatic charge is applied to the paper to attract toner particles.

Answer 12

A. An electrostatic charge is applied to the drum to attract toner particles.

Question 13

13. Which of the following are possible interfaces for printers? (Choose three.)
    A. Parallel
    B. SATA
    C. USB
    D. Network

Answer 13

A. Parallel
C. USB
D. Network

Question 14

14. You have just installed a new printer, but it prints only garbled text. Which of the following
    is likely the problem?
    A. Wrong IP address
    B. Worn print head
    C. Incorrect printer drivers
    D. Unsupported printer

Answer 14

C. Incorrect printer drivers

Question 15

15. Which printer contains a wheel that looks like a flower with raised letters and symbols on
    each “petal”?
    A. Inkjet printer
    B. Daisy-wheel printer
    C. Dot-matrix printer
    D. Laser printer

Answer 15

B. Daisy-wheel printer

Question 16

16. What part of a laser printer supplies the voltages for charging and transferring corona assemblies?
    A. High-voltage power supply (HVPS)
    B. DC power supply (DCPS)
    C. Controller circuitry
    D. Transfer corona

Answer 16

A. High-voltage power supply (HVPS)

Question 17

17. Which printer part gets the toner from the photosensitive drum onto the paper?
    A. Laser-scanning assembly
    B. Fusing assembly
    C. Corona assembly
    D. Drum

Answer 17

C. Corona assembly

Question 18

18. Which step in the laser printer printing process occurs immediately after the exposing phase?
    A. Charging
    B. Fusing
    C. Transferring
    D. Developing

Answer 18

D. Developing

Question 19

19. Which laser printer component permanently presses the toner into the paper?
    A. Transfer corona
    B. Fuser assembly
    C. Printer controller circuitry
    D. Paper transport assembly

Answer 19

B. Fuser assembly

Question 20

20. Which of the following most accurately describes how to obtain a firmware upgrade for
    your laser printer?
    A. Download the firmware upgrade for free from the manufacturer’s website.
    B. Pay to download the firmware upgrade from the manufacturer’s website.
    C. Have a certified laser printer technician come to your site and install a new firmware chip.
    D. Contact the manufacturer of the printer, and they will send you the firmware upgrade
    on a DVD.

Answer 20

A. Download the firmware upgrade for free from the manufacturer’s website.