DOWNED SIM/SIM UP TRAINING

Question 1

What would you do in the event of a downed sim?

Answer 1

Refer to the Flight Safety International Brochure if I’m unable to resolve the problem.

Question 2

Should I contact flight safety & update them that the Sim has been returned to operation?

Answer 2

Yes. The issue needs to be resolved.

Question 3

Control Calibrate will not calibrate - fails B206

Answer 3

Stop controller > and restart

Question 4

Motion system in the C90 is not engaging

Answer 4

Keep the control loader ON > Power recycle > Soft reset switch in the RAM cabinet

Question 5

Projector 3 in the c90 has gone down, what to do?

Answer 5

8/15/23

Figure out which projector is # 3 (example) from the DMS (Display Management System) screen in the servo room, and restart the projector by power cycling it and reseeding cables?

Question 6

Projector 1 is having problems and controller is crashing in the 206, what to do?

Answer 6

8/15/23

Restart controller from the >tools>controller option. (This seems to work, did not receive call back)

Restart visual stack and reseed #1 power plug for projector at outlets.

Question 7

IPT or DTT trainers failure scenario:

Master reset will not work. The system wont reset and some of the avionics wont turn on.

Answer 7

The system needs to be reset. Flip the power bars and restart the system.

This works most of the time

Things to keep in mind are: fans not working, network switches failing, power supplies failing, video cards failing