Where can you find data for all the instruments?
Two data files (excel, parts database)
SQAHelp what program are test loads created and modified
DevStudio
The reactions of the simulator are controlled by?
Programs stored in the host computer (SCS)
The purpose of the Digital Control Loading System (DCLS) is what?
Simulate the movements and forces to generate an accurate representation of an actual flight.
Name in-flight variables that are controlled through simulation software.
Malfunctions, aircraft sounds, aircraft controls, visual scenes and communications.
What does DMS and eCLMnt stand for?
- Digital Motion Server
- Control Loading and Motion
The CLM Server processes?
Flight-model data from the (SCS) host computer and incorporates it into the DMS server program to replicate realistic in-flight aircraft motion.
What does the IOS do with means to the DMS ?
Contains a means for controlling the DMS via an ON/OFF power button (control loading) and emergency stop
How does the load program (upstairs on the scs) communicate to the server room and then to the control loading cabinet?
Communicates to:
- eCLMnt computer, DAS and control loading heads
The host computer is the commanding device
The eCLMnt server performs which DMS (Digital Motion System) software subroutines?
- Computes the control loading actuator forces, positions, and movements from the load cells in the linkage and the flight parameters it receives from the host.
See eCLMnt DCLS (TM-1-5494-DCLS3-011), page 57
Note: Follow the pictogram
The motion control software subroutine performs which functions?
Erect, Settle, Fade, Maintenance/FAA Test, Geometric Transformation
Performing a windows activation
- Set disk boot up to priority from bios
- Insert disk into disk drive
- Select recover from the screen
- browse from files for DTT1 selection IOS
- select number 2?
- make sure all selections are selected
- click “next” to move forward at all times when prompted
- When finished the windows activation will come up
What does GNSS stand for?
What does the system do?
- Global Navigation Satellite System
- Uses orbiting satellites to plot latitude and longitude positions on the earth.
What does GPS do?
- GPS satellites continuously transmit highly monitored position and timing data to a GPS receiver.
Describe what the advantage’s of GPS for signal coverage are.
- Provide a minimum of four satellites visible from any point on Earth.
DTT1 continues to fail when master reset. What to do?
Run the acronis set up. And follow the steps to load the program onto the computer. (Word Document)
Note: This did not work last time. (Update this answer once a correct scenario is working).
1/14/2026
Put old peripherals, cards and power supplies into newer computer? (This was done by the evening shift and they were able to get the computer to network properly).
What is in the master index of the IOS?
ATIS, Weather, Cloud Layers, quick set, runway conditions
Runway lighting, malfunction index, circuit breaker index, crash, station search, demonstration record/ replay, target scenarios
scripted scenarios index, maintenance index
Auto Trim In Progress is stuck on the screen?
Restart the host computer.
10/16/2025
G5 problem:
Visuals are not responding. Tried doing a master reset but visuals are not resetting. The instruments in the cockpit are working and resetting.
What I did:
- My training led me to believe that visual connection to the simulation had been interrupted or lost.
What I tried:
- Attempted to reestablish a connection by using the tap stop/tap start feature (Picture went black on all projectors)
For future
- To see if the DMS has disconnected use the Host Emulation feature to determine if projectors, visuals and DMS are connected and talking
What Dave did:
- Restarted the host program at the IOS station (This reestablished the connection between the visuals and host)
10/15/2025
B206 problem:
Projectors 5 & 6 are not aligned. This problem happened first thing in the morning when the simulator was started.
What I did:
- Tap stop/ Tap Start did not work
- Restarted the visual stack (This did not work)
- Followed the procedure for restarting the DMS x2 (This did not work)
What Dave did:
- Ran the spatial alignment (Projector 6 failed and we needed to bring the side wall over. Projector 8 failed and the test needed to be run again on the last two projectors 7, 8)
- Spatial eventually passed and then the DMS was restarted.
- The image was restored.
Note: Don’t clear the color
Fault 1 faults in the DAS program are classified as?
Disengage faults: The system is brought to a settled position under Motion Base Computer control.
CL DAS stopped incrementing at packet # XXXX
- Could be a firewire problem in Moog’s associated card. Restart the application.
- Otherwise, reboot the DAS
Note: See Quick list of eCLMnt faults
What does TCP stand for?
Transmission Control Protocol.
TCP operates at the transport layer of the OSI model.
And it mainly manages the connection between the computers on a network.
What does IP stand for?
Internet Protocol
IP operates at the third layer of the OSI networking model, i.e, the network layer.
The main function of this protocol is to define the way network data is supposed to be addressed from its source to destination.
