1
Q
What is a laboratory experiment?
A
The IV is manipulated by the researcher and the experiment is carried out in a laboratory or other contrived setting away from the participants’ normal environment.
2
Q
What are the strengths of laboratory experiments?
A
- High controls produces scientific research which is easy to replicate.
- We can be sure that the variable we manipulate (the IV) is the factor affecting the DV (the results)
3
Q
What are the weaknesses of laboratory experiments?
A
- Low ecological validity due to artificial settings.
- The artificial setting or tasks do not reflect real-life events, so behaviour may be artificial.
4
Q
What is a field experiment?
A
The IV is manipulated by the researcher but this time the experiment is carried out using participants in their normal surroundings.
5
Q
What are the strengths of field experiments?
A
- A more realistic setting for a study, so ecological validity will be higher.
- Behaviour is likely to be more truthful reflections of real-life actions.
6
Q
What are the weaknesses of field experiments?
A
- Lack of control of the setting means we can’t always assume the IV is influencing the DV - risk of extraneous variables influencing behaviour.
- There may be ethical issues as participants might not be aware they were in an experiment.
7
Q
What is a quasi experiment?
A
The IV is naturally occurring (e.g. cloudy conditions versus sunny conditions), not manipulated by the researcher.
8
Q
What are the strengths of quasi experiments?
A
- Can study the effects of variables that researchers can’t manipulate, such as the weather.
- Usually high levels of ecological validity due to the naturally occurring IV.
9
Q
What are the weaknesses of quasi experiments?
A
- They can be very difficult (if not impossible) to replicate due to the naturally occurring IV.
- Lack of control over all of the variables, e.g. the social setting, lifestyles- these may be confounding variables that influence the results.
10
Q
What is the repeated measures design?
A
Involves using the same people in each condition.
11
Q
What are the strengths of using a repeated measures design?
A
- Participant variables will not affect results as it is the same people (with the same range of abilities) who take part in each condition of the experiment.
- Half the number of participants are needed to get the same amount of results as in the other designs.
12
Q
What are the weaknesses of using a repeated measures design?
A
- Order effects (either getting worse due to fatigue or getting better due to practice) can affect the results from the second condition.
- To avoid order effects, it may be necessary to create additional test materials (for use in the second condition) which are different yet if an identical difficulty - this may be very hard to achieve.
13
Q
What is the independent measures design?
A
Involves using different people in each condition.
14
Q
What are the strengths of using an independent measures design?
A
- There is no risk of results being affected by the order in which participants do the task as they only do the task once (unlike in the repeated measured design).
- It is possible to use the same task in each condition, controlling for any differences in this as a possible extraneous variable and making it easier for the researcher.
15
Q
What are the weaknesses of using an independent measures design?
A
- Results can be affected by participant variables as there are different people in each condition and, inevitably, there will be individual differences between them.
- Twice as many participants are needed as in repeated measures design just to get the same amount of results.
16
Q
What is the matched participants design?
A
Involves using different people in each condition but an attempt is made to make participants as similar as possible on certain key characteristics (any that might influence findings). This is done by testing the individuals on the key characteristics, pairing them based on similar scores, and then placing one member of each pair into each group.
17
Q
What are the strengths of using an matched participants design?
A
- You get the benefits of both of the designs: order effects are avoided as participants only take part in one condition of the experiment and participant variables are not a problem as participants are matched on relevant characteristics.
18
Q
What are the weaknesses of using a matched participants design?
A
- It is more complicated as participants need to be pre-tested on a relevant characteristic so that they can be distributed evenly across the different conditions of the experiment.
- Twice as many participants are needed as in a repeated measures design just to get the same amount of results.
19
Q
What are controls?
A
20
Q
What are order effects?
A
If doing the same activity twice, participants may do better the second time due to practice or worse due to fatigue or boredom.
21
Q
What is counter-balancing?
A
- Where, when a repeated measured design is used, the participants are split into two groups where one group does the two conditions in one order and the other group does the two conditions on the other order.
- This is a way of controlling situational variables (e.g. order effects).
22
Q
What are demand characteristics?
A
Cues in an experiment that communicate to participants what is expected of them and which may unconsciously affect the behaviour of participants.
23
Q
What are researcher effects?
A
Describes how results could be affected by a researcher’s behaviour e.g. the researcher may be more encouraging in the experimental condition which could explain the participants’ increased performance rather than the IV being responsible.
24
Q
What is a single blind?
A
When the participants do not know the aim of the study.
25
What is a double blind?
When neither the participants nor those carrying out the research know the aim of it.
26
What is researcher bias?
When a researcher allows their hopes and expectations for what the data will look like to affect (for example) the data they choose to hold onto or reject from a study or, alternatively, allows it to influence who they choose as participants for their study(e.g. choosing those they think may behave in particular ‘convenient’ ways).
27
What is a hypothesis?
A precise testable statement of the relationship between two variables.
28
What is a null hypothesis?
- Predicts that the IV will **not** have an effect in the DV.
- The null hypothesis predicts that any difference seen will be due to chance factors rather than the IV.
29
What is an alternative hypothesis?
- Predicts his one variable (the IV) is likely to affect another variable (the DV) .
- Predicts that the IV **will** affect the DV.
30
What is a two-tailed alternative hypothesis?
Predicts that the IV will have a significant effect on the DV but it does not predict the direction this effect will go.
31
What is a one-tailed alternative hypothesis?
Predicts not only that the IV will have a significant effect on the DV but also the direction this effect will go in.
32
What is operationalisation?
Refers to the process of making variables physically measurable or testable.
33
What is the target population?
The group of people the researcher is interested in studying.
34
What is the sample?
The actual group of participants used in the research.
35
What are sampling methods?
The different ways in which researchers can obtain a sample of people from within the target population to take part in their study.
36
What is self-selecting sampling?
When people volunteer to take part in the study. Often adverts, posters or leaflets will be distributed which contain details about the research and contact details for participants to use if they wish to take part.
37
What are the strengths of self-selecting sampling?
- Participants are usually aware of the purpose of the research (so have consented to take part).
- Participants are likely to show up and continue with the research, especially if there is an incentive.
38
What are the weaknesses of self-selecting sampling?
- Biased based on who volunteers / where you advertise.
- Possible time and cost of advertising.
- May not get any volunteers.
39
What is opportunity sampling?
A sample of participants produced by selecting those who are most readily available at a given time and place selected by the researcher.
40
What are the strengths of opportunity sampling?
- Convenient as you are selecting participants who are there at the time.
41
What are the weaknesses of opportunity sampling?
- Biased based on who is available at the time / who the researcher selects.
- Less ethical as participants may feel obliged to take part and continue.
42
What is random sampling?
A technique in which each member of the target population has an equal charge of being selected.
For example, all the names of everyone within a given target population could be placed in a hat, and the first 20 to be drawn out could comprise the sample.
43
What are the strengths of random sampling?
- More representative (of the target population) as everyone has a chance of being selected.
**More than what?**
44
What are the weaknesses of random sampling?
- Difficult to get all the names of everyone in the target population.
- They may not be willing to take part (so could still become biased).
45
What is snowball sampling?
When participants are asked to contact their friends and family to ask them to also take part in the research; they, in turn, then ask other people.
46
What are the strengths of snowball sampling?
- Fairly easy to recruit a large sample as you only need to recruit a few participants and they recruit the rest.
47
What are the weaknesses of snowball sampling?
- May be more likely to get friends of participants so they could have similar characteristics.
- May not get enough participants if they don’t recruit others.
48
What are the four key ethical principles?
- Respect
- Competence
- Responsibility
- Integrity
49
What ethical guidelines fall under respect?
- Informed consent
- Right to withdraw
- Confidentiality
50
What ethical guidelines fall under competence?
51
What ethical guidelines fall under responsibility?
- Protection of participants
- Debrief
52
What ethical guidelines fall under integrity?
- Deception
53
What is primary data?
54
What is secondary data?
55
What is quantitative data?
Data in numerical form - either the raw data collected in the study or data which has been turned into statistics such as means, medians or percentages.
56
What are the strengths of quantitative data?
- Easy to analyse results band compare them between different groups / conditions.
57
What are the weaknesses of quantitative data?
- Lack of detail (does not explain the results obtained).
58
What is qualitative data?
Data that is descriptive. It could be in the form of words, pictures, descriptions (e.g. of behaviour in a study).
59
What are the strengths of qualitative data?
- Can generate a lot of detail and explain the results you obtained.
60
What are the weaknesses of qualitative data?
- More difficult to analyse and compare.
61
What are raw data tables?
62
What are descriptive statistics?
63
What are measures of central tendency?
64
How do you calculate the mean?
Add up all the numbers and then divide by however many numbers there are.
65
What are the strengths of using a mean?
- All data is included (nothing is missed out) in the mean.
66
What are the weaknesses of using a mean?
- Can be skewed by extreme data (i.e. very large scores or very small scores) so it doesn’t represent most of the scores.
67
How do you calculate the median?
- Put the numbers in order and then find the middle value.
- If there are two in the middle, add them together and divide by two.
68
What are the strengths of using a median?
- Less affected by extreme scores so results won’t be skewed.
69
What are the weaknesses of using a median?
- Can take a long time to calculate for a very large data set (as you have to put it all in order).
70
How do you calculate the mode?
Find the most frequently occurring number.
71
What are the strengths of using a mode?
- Easy to calculate.
- Can be used for nominal data.
72
What are the weaknesses of using a mode?
- It is impossible to calculate if all the data is different.
- There may be more than one mode.
73
What are measures of dispersion?
Tell us how spread out the data is.
74
How is the range calculated?
The highest number minus the lowest number.
75
What are the strengths of using a range?
- Quick and easy to calculate.
76
What are the weaknesses of using a range?
- The data can be skewed by outliers.
- Only takes into account top and bottom values (not all the data).
77
How is the variance calculated?
-
-
78
What are the strengths of using the variance?
- Takes into account all values (not just top and bottom values).
79
What are the weaknesses of using the variance?
- Takes time and is more difficult to calculate than the range.
- Only takes into account the squared values (not the original units the data was first in).
80
How is the standard deviation calculated?
Square root of the variance.
81
What are the strengths of using the standard deviation?
- Takes into account all the data.
- Expressed in the same unit as the original data (rather than squared data).
82
What are the weaknesses of using the standard deviation?
- Time-consuming.
- More difficult to calculate **than the range**.
83
What is the experimental condition?
The condition which has experienced the change or manipulation.
84
What is the control condition?
The condition which has not experienced the change or manipulation.
85
What is the independent variable?
The factor the researcher changes / manipulates in an experiment.
86
What is the dependent variable?
The factor being measured.
87
What are extraneous variables?
Other variables that could potentially influence the Dependent Variable apart from the Independent Variable.
Psychology
flashcards
Decks in class (28)
# Cards
-
Milgram30
-
Methological Issues9
-
Experiments87
-
Self Report36
-
Piliavin40
-
Bandura33
-
Kohlerg40
-
Loftus And Palmer38
-
Moray32
-
Freud18
-
Gould32
-
Correlation40
-
Sperry18
-
Blakemore And Cooper18
-
Chaney30
-
Lee19
-
Observation47
-
Grant23
-
Simons and Chabris13
-
Maguire16
-
Casey15
-
Levine15
-
Bochiarro12
-
Hancock13
-
Baron-Cohen14
-
Core Studies in Their Pairs12
-
Key Themes and Areas of Psychology45
-
Extra Bits (Unit 1)67
