Preliminary preflight procedure CA or FO
- IRS selectors - Off 30 sec, then On
- Status display - Check
Verify only expected messages.
Verify:
-O2 pressure
-hydraulic quantity
-Engine Oil quantity - EICAS display
Verify only expected alert and memo messages shown.
-Do the remaining actions after crew change or maintenance action.
-Verify Crew O2 Low blank - Maintenance log
- Safety Equipment - Check
-fire extinguisher
-crash axe
-flight deck overhead door
-emergency descent devices
-PBE
-gloves
-Avsax
-life vests - Parking brake - as needed
Before Start Flow
- CA or FO if PF
MCP - Set
- V2 set
- arm LNAV as needed
- arm VNAV as needed
- set initial heading/track
- set initial altitude - CA - TrimFO - Hydraulic Panel - Set
- Fuel Panel - Set
- Beacon - On
- Cancel/recall switch - Push
- Transponder - XPDR
Before Taxi Flow
CA - 1. Call flaps
2. Flight controls - check
FO - 1. Engine Gen OFF lights - extinguished.
2. APU - OFF
3. Engine Anti-Ice - as needed
4. Flaps - Set T/O flaps
5. Secondary Eng display - Off
6. Recall - check
After Landing Flow
PF - 1. Speedbrake - down
2. Wx radar/ Terr - Off
PM - 1. Speedbrake - verify down
2. APU - as needed - Start, On
3. Engine Anti-ice - as needed
4. Exterior lights - as needed
5. Wx radar/ Terr - off
6. Autobrake - Off
7. Flaps - up
8. Transponder - XPDR
9. Company - verify arrival report
Shutdown Flow
CA - 1. Fuel controls - Off
2. Flight Director - Off
FO - 1. Seat belts - Off
2. Hydraulic panel - Set
3. Fuel pumps - Off
4. Beacon - Off
5. Flight director - Off
6. Transponder - Stby
7. System Status message - check
Securing Flow
CA - 1. HUD combiner - Stow
2. EFB - Off
FO - 1. IRS selectors - Off
2. Battery switch - Off
3. FD power switch - Off
4. Emergency Lights switch - Off
5. Lower Recirc, PACK switches - Off
6. HUD combiner - stow
Line up and wait
- Runway turnoff lights,
Strobe, wing ….. On - Transponder ….. T/RA
After takeoff
After flaps up;
Anti-ice ….. Auto
Nose light ….. off
Taxi light ….. off
Checklist
