Flows

Question 1

Before Start / Pushback

Answer 1

CA -
1. Set trim after hydraulics are pressurized

FO -

1. Hydraulic Panel
2. Fuel Panel
3. Beacon
4. Transponder
5. CANC/RCL

Question 2

Shutdown

Answer 2

CA / FO

CA
When ground power is selected (if available) CA shuts down the engines.
F/D switch - OFF
When chocks are in, release the Parking Brake

After the flow/procedure is complete, the CA will call for the “SHUTDOWN” checklist.

FO

1. External PWR (as req)
2. Seat Belts Sign - OFF
3. Hydraulic Panel
4. Fuel Panel
5. Anti-ice (if ON AUTO)
6. BEACON - OFF
7. F/D SW & Terrain switches - OFF
8. Transponder - STBY
9. STATUS check (to check the status wait approx 3 mins after HYD PRESS SYS L+C+R message is shown)

Question 3

Secure

Answer 3

FO

1. ADIRU - OFF
2. Emergency Lights - OFF
3. Pack Switches - OFF

Question 4

After Landing

Initiated when SPEEDBRAKE Lever is moved down and aircraft is clear of the runway.

Answer 4

PF / PM

PF
Moves the SPEEDBRAKE Lever down, and turns OFF WX Radar this triggers the PM flow.

PM

1. APU - ON
2. Lights
3. Engine anti-ice (if req)
4. Auto brake - OFF
5. FLAPS
6. Transponder

Question 5

Before Taxi

Answer 5

CA and FO -

CA
When ground equipment is clear the CA will call “Flaps ___”, and perform a flight controls check

When flows / procedures are complete the CA will call for the “Before Taxi” checklist.

FO

1. APU - OFF (if not req)
2. Engine Anti-ice
3. Flaps
4. CNCL/RCL