Max thrust in ground?
40%
How long should we wait for the APU sequence to start?
- “APU Master” pb sw. Wait 3 sec.
- “APU Starter”. Wait 1 min.
- “APU Bleed” pb sw.
Cockpit prep C/L. «ACFT ACCEPTANCE”………. ?
“COMPLETED”
Before start C/L. “T.O DATA” ………. ?
“CONFIRMED”
Before start & taxi C/L.
PED………??
EFB………??
PED ………. FLIGHT MODE
EFB ……….. “STOWED & DISC”
Minimum legal fuel EZY
5.2 T
What should be done after completion of a flight or day?
Close FPL and update FS+ manager.
How is tankering done?
Fuel from the way back (or next leg) + TRIP fuel first flight + TAXI IN first destination + Discretionary fuel.
How do we know if we have enough oxygen to go?
On ground: (OAT + Cockpit temperature) / 2
NO APU procedure. Start up with ASU:
- eQRH ‘SI - Engine start with ASU and crossbleed start’ - before connecting ASU
- Cockpit prep C/L
- Before start C/L
- eQRH ‘SI - Engine start with ASU and crossbleed start’ - clear to start
- After first engine start
When do we do FO FULL cockpit prep checks?
Only on the first flight of the day.
Quicker way to check the route in the box as PM?
DATA > NEXT PAGE > Stored WAYPOINTS ROUTE.
A320neo. How do we do the CVR test?
We need to plug the headsets first on the overhead panel.
[Flight ops tech manual 1.6.2]
Brakes max temperature with and without brake fans available?
With 150°C.
Without 300°C.
Procedure when QNH changes or ENG A/ICE is used for take off?
- Substract 1°C of FLEX if the QNH decreases by 1 or 2 hPa.
- Substract 5°C of FLEX if ENG A/ICE will be used for take off.
