JE

Question 1

Duties and responsibilities of the JE

Answer 1

a. Obtain permission of the EOW prior to leaving the Main Machinery Room for any reason.

b. Make a round ofengineering spaces prior to relieving the watch. Normal watch relief will take place on the half-hour

c. Make hourly rounds on operating machinery that is not monitored by MPCMS.

d. Check local operating pressures and temperatures on equipment with remote indicators that are OOC as directed by the EOW.

e. Prepare equipment for operation using EOP’s.

f. Keep bilge fluids to a minimum by pumping them into the oily water tank.

g. Add oil to machinery as necessary.

h. Wipe down machinery, secure potential missile hazards, and police all machinery spaces for oil, rags, and trash.

i. While on watch, maintain communications with the EOW at all times.

Question 2

MDE RPMS

Answer 2

IDLE: 350
FULL: 900

Question 3

MDE Lube oil normal parameters

Answer 3

Psi: 26-80
Temp: 140-205
Differential:15 psi

Question 4

MDE F/O parameters

Answer 4

38-100 PSI
Primary dif: 15
Secondary dif: 10

Question 5

MDE L/o pressure shut down

Answer 5

11psi
Or 31@ 650 rpm or greater

Question 6

MDE J/W parameters

Answer 6

PSI: 15-40
Temp: 140-210

Question 7

MDE L/O Temp high alarm.

Answer 7

214°

Question 8

MDE overspeed

Answer 8

Alarm: 918
Shutdown: 1017

Question 9

F/O pressure alarms

Answer 9

Low: 37
High: 102

Question 10

F/O pressure alarms

Answer 10

Low: 37
High: 102