Required Callouts

Question 1

During go around. Excessive angle of bank is called when

Answer 1

“BANK” at 7 degrees

Question 2

During go around the attitude is too high

Answer 2

“PITCH” +20degrees

Question 3

During go around the attitude is too low

Answer 3

“PITCH” 10degrees or less

Question 4

During go around the climb rate is insufficient

Answer 4

“SINK RATE” no climb rate

Question 5

RNP-AR
Support calls vertical and lateral
sink rate and bank
& When to Go Around
and when do they apply?

Answer 5

PM Calls out excessive deviation
L/DEV reaches 1/2 dot (LAT DEV)
(scale is in 0.1nm, max scale 0.2nm)
V/DEV reaches 1/2 dot (V/DEV)
(vertical scale 1 dot=100’)

“sink rate” v/s above 1000’/min
“Bank” when bank angle>30deg

Go around must be initiated
XTK reaches 1RNP
V/DEV reaches 3/4 dot below profile

Apply from
vertically from the FAF
laterally from below MSA/MVA

Question 6

ILS approach support calls

Answer 6

LOC and GLIDE
called at 1/2 dot

Question 7

NPA calls

Answer 7

“CROSS TRACK” when>0.1nm
“V/DEV” when > 1/2 dot
“COURSE” when> 1/2 dot or 2.5 deg VOR or 5deg ADF

Question 8

2D approach lateral path tracking tolerance

Answer 8

within 5 degrees of track
within half scale if using lateral course deviation indicator guidance
within 1xRNP

Question 9

3D approach LAT and VERT tolerance

Answer 9

within 5 degrees of track
within half scale if using lateral course deviation indicator guidance
within 1xRNP

vertical
within half scale or 75’ for RNP BARO VNAV