Sec - 8 (Lining Application)

Question 1

As a general rule, the surface temperature must be at least,,,,,, the dew point temperature in the tank and the relative humidity should be,,,,,,, at the steel surface.

Answer 1

5 °F (3 °C) above

below 80 %

Question 2

,,,,,,,,,,,,provides guidance on the use of dehumidification and heating equipment for environmental controls during tank lining work

Answer 2

NACE 6A192/SSPC-TR 3

Question 3

Excess,,,,,,, thickness is a common cause of failure of thick-film lining system

Answer 3

primer

Question 4

,,,,,,,,,,,,,,,, are major causes of premature lining failure

Answer 4

Improper application and inadequate curing tim