201.1 Define and state the purpose of FSM. [ref. d]
201.2 Explain why all units commshifting to FSM need a legacy route. [ref. d, para 2.3.3]
201.3 State the purpose of MMS. [ref. g]
201.4 State the purpose of the MUA. [ref. b]
201.5 State the purpose and components/systems that comprise FMX/DUSC. [ref. d, g]
201.6 State the sites that have a FMX/DUSC C2OIX system. [ref. d]
201.7 State the master and alternate DUSC stations. [ref. d]
201.8 Define and state the purpose of MCS. [ref. d, g]
201.9 State the world-wide MCS RI. [ref. d]
201.10 Define and state the purpose of the following: [ref. d]
a. RI - Routing Indicator, 7-digit code identifying a station.
b. OSRI – Originating Station Routing Indicator, station originating a message
c. DSRI – Destination Station Routing Indicator, station a message is being sent to
d. NARC – Navy Automated Relay Controller, First 4 digits of routing indicator
e. FRI – Fleet Routing Indicator, last 3 digits
201.11 State the RI that MCS will assign to an invalid PLA within a transmitted message.
201.12 State the purpose of the following common modified ACP 126 message F/L: [ref. d]
a. 1 - preamble (VZCZC), circuit identification, channel sequence number
b. 2 - Message header, Same as ACP 128 except use RHMCSUU for the DSRI
c. 4 - Security Warning
d. 5 – Precedence, DTG
e. 6 - Message Originator (FM)
f. 7 - Action addressees (TO)
g. 8 - Information Addressee (INFO)
h. 9 - Exempt addressees (XMT)
i. 11 - Prosign BT
j. 12 - Message test
k. 13 - Prosign BT
l. 14 - Confirmation
m. 15 - End of Message (EOM)
n. 16 - NNNN
201.13 Define the following common OPSIGs: [ref. i]
201.14 Define and state the purpose of CUDIXS. [ref. d]
201.15 List the sites that have CUDIXS suites and their capabilities. [ref. d]
201.16 Explain whether each master station can radiate each other’s CUDIXS and their limitations. [ref. b]
201.17 State the purpose of MPS-800. [ref. j]
201.18 Define and state the purpose of the following fleet multi-channel broadcast
packages: [ref. d]
a. LMUL – LANT Multichannel
b. IMUL – IO Multichannel
c. PMUL – PAC Multichannel
All three have been consolidated into the Worldwide Multichannel (WMUL) Broadcast.
Uplink can occur from any station with a NMT, to the MILSTAR sattelites for crosslinking, crossbanding, and worldwide broadcast.
201.19 State the purpose of the following and the required equipment to perform the function: [ref. d]
a. 1. BCA – Broadcast Control Activity – Implements an approved Fleet Broadcast for a specific communication area and provides direction and guidance to govern its assigned broadcast employment. They control (have authority over) the broadcast.
b. 2. BKS – Broadcast keying station – introduces message or facsimile traffic into the fleet broadcast network. They encrypt (key) the broadcast data.
c. 3. BCS – Broadcast Control Station – provides all the technical aspects of affecting a Fleet Broadcast, which include assembling key streams received from the BKS into a specific broadcast channels and delivering a composite key stream to the Broadcast Radiating Station (BRS) for transmission. They multiplex (control) the broadcast.
d. 4. BRS – Broadcast Radiating Station. They radiates the broadcast signal to the fleet Via Satellite
201.20 Define and state the purpose of the following DMS components: [ref. d]