Before Takeoff Check

Question 1

When checking the EICAS in the before takeoff flow, what are you checking?

Answer 1

1. TO-1 or TO-2
2. ATTCS
3. FLEX Temp

Question 2

What is the Before takeoff Check Flow

Answer 2

1. MINTO
2. EICAS
3. TAKEOFF CONFIG

Question 3

When does the Auto Throttles take over during the takeoff?

Answer 3

at 50 TLA

Question 4

What is ENG TLA NOT TOGA - EICAS Message mean?

Answer 4

When thrust levers are out of the TOGA detent position.

Question 5

During a FLEX takeoff and you have RSV ATTCS is set to on. When will normal thrust engage during a flex takeoff?

Answer 5

1. N1 difference between both engines of 15%
2. One engine inop
3. Setting thrust levers to MAX THRUST detent
4. Windsheer

Question 6

When are reduced thrust takeoff not allowed

Answer 6

1. Contaminated Runway
2. Windshear
3. The procedure requires max thrust

Question 7

What airspeed do you want up to 2500 feet

Answer 7

200kts

Question 8

During takeoff you want to make sure you reach TO/GA before reaching what speed?

Answer 8

60kts

Question 9

The call out CHECK THRUST what is the PM checking?

Answer 9

1. N1 has reached target N1
2. ATTCS is green
3. Engine paramenters.

Question 10

Can LNAV be armed on the ground?

Answer 10

Yes, it will activate at 200AGL

Question 11

Explain the Wing A/I Valve open msg

Answer 11

It is a normal test upon reaching 10,000’ agl or 10 minutes after takeoff. It will run for 1 minute or until all slat temp sensors increase by 10 degrees C