When would you get a LOAD SHED EICAS message on the taxi out?
When on 1 ac Power source and taxi sped greater than 50kts
You want to limit N1 to how much during taxi?
40%
What is the best technique to use the brakes
Less applications with stronger pressure, don’t ride the brakes.
When would you not use single engine taxi?
- Contaminated Ramps, taxi ways,
- Takeoff less than 5 minutes
- Airport restrictions
- Chances of blowing ramp personnel
- Small Maneuvering area
What do you do if you get a STEER FAIL message
- Press and hold Steer Disc Switch
- Press and release Nosewheel Steering Handle
- Release Steer Disc Switch
- You can do this procidure on the ground when stopped and parking brake on.
- Once in the Air
- Call Mx is this does not clear up
During ground operations of more than 30 minutes in icing conditions or increased Fan Vibration do to ice accumulation. What procedure can you do?
Increase N1 to 54% for 30 seconds or until fan vibrations returns to normal.
When will the windshields be heated?
When you have 2 AC power sources.
During a single engine taxi, which probes/TAT’s are being heated?
All Probes
What is HOLD Mode on takeoff for the Auto Throttles?
It locks in the takeoff setting between 60kts and 400 feet to prevent auto throttle changes specially during a rejected takeoff.
