Flows

Question 1

SIM Left Seat

Answer 1

1. Yaw Damper - ON
2. Fuel Pumps - Main tanks (all 4) ON, center tanks as RQD
3. Seat Belt Sign - ON
4. Window Heat - ON
5. Hydraulic Pumps - A’s OFF / B’s ON
   6 Autobrake - RTO
6. T/O Warning Horn -Check
7. Aileron/Rudder Trim - Centered

Question 2

Push Back

Answer 2

1. Pushback Time - Noted
2. Anti-Collision Light - ON
3. ISOLATION VALVE - Confirm AUTO
4. Recirculation Fan(s) - AUTO
5. Air Conditioning - PACKS OFF

Question 3

CA - “Start #2”

Answer 3

FO - “Starting #2”

1. Engine Start Switch 2 - GND
   After rollback
2. Clock
3. Engine Start Switch 2 - CONT
4. ISOLATION VALVE - CLOSE
5. R PACK - Auto/High

Question 4

CA “Start #1”

Answer 4

FO “Start Engine #1”

1. Engine Start Switch 1 - GND
   After Rollback
2. Clock
3. • Engine Strat Switch - CONT
     4.- Ignition Switch - IGN L
4. • APU Bleed - OFF (as required)
5. • L PACK - Auto/High
6. • ISOLATION VALVE - AUTO

Question 5

After Start Flow

Ground Crew and Equipment are Clear

Answer 5

1. Electrical (GEN 1, GEN 2) - ON
2. APU Switch - OFF
3. PROBE HEAT Switches - ON
4. Anti-ice - If required
5. System A Hydraulic Pumps - ON
6. PACK and BLEED Switches - As Required
7. WHEEL WELL (Light) - OFF
8. Oil Quantity - Check
9. Start Levers - Verify IDLE detent
10. Hand on Flap Lever - “Standing by Flaps”