Establishing power and AC if aircraft is unpowered
GND TEST selector - NORM
BATTERY - ON
Hydraulic panel - verify all demand pumps off
Landing gear lever - down
ALTN FLAPS ARM switch - verify ALTN not displayed
ALTN FLAPS selector - OFF
EICAS Display check
Verify no exceedances
Oil qty above mins (18 qt)
Normal EICAS messages for this stage (nothing requiring maintenance action)
DSP SYS switch, STAT menu
Hydraulics, verify no RF or OF
check O2 pressure adequate
Check liquid cooling - no OF or RF
Status messages - check only normal messages
CB menu check
Check OPEN/TRP CB page for open breakers
Verify any open CB status with maintenance/MEL/MRD as appropriate
DSP INFO switch
Verify effective dates
On some -900, and all 787-10, must select AIRPORT MAP page to check this
DSP CHKL switch
Select RESETS
Select or confirm correct revision date selected
Accomplish RESET ALL function
ACARS and FMC
Initialize
FD DOOR CHECK
Enter code
Unlocked, then AUTO
