On the NG, what is the maximum allowable EGT for Engine Start?
a)
725°C
b)
795°C
c)
750°C
725°C
What condition(s) would cause an amber Engine Fail (ENG FAIL) Alert?
a)
Engine N2 below sustainable idle (50% N2) and engine start lever in IDLE position
b)
Engine N2 below sustainable idle (50% N2)
c)
Engine start lever in IDLE position
Engine N2 below sustainable idle (50% N2) and engine start lever in IDLE position
What does X-BLD START above the N2 dial indicate?
a)
Crossbleedair recommended for inflight start
b)
Windmill start recommended
c)
Crossbleed air not recommended for start
Crossbleedair recommended for inflight start
What happens if the APU does not reach the proper speed with the proper acceleration rate within the time limit of the starter?
a)
The APU GEN OFF BUS light illuminates
b)
The APU will introduce more fuel
c)
The start cycle automatically terminates
The start cycle automatically terminates
On the engine panel on the aft overhead panel, both ON and ALTN may be in view if the EEC has:
a)
failed
b)
automatically changed to the soft alternate mode
c)
manually entered the hard alternate mode
automatically changed to the soft alternate mode
What is minimum engine oil pressure for the B737-800?
a)
5 psi
b)
10 psi
c)
13 psi
13 psi
What does an Amber Arc on an Engine Limit Display indicate?
a)
Cautionary range
b)
Normal operating range
c)
Maximum and minimum limits
Cautionary range
When the EEC is in soft alternate mode, thrust rating shortfalls and exceedances _______ occur as flight conditions change.
a)
may
b)
cannot
c)
would not
may
The engines may be started with air:
a)
from the APU or ground source
b)
by using engine crossbleed
c)
all answers are correct
all answers are correct
IGN L is powered by AC transfer bus #1 for engine #1 and AC transfer bus #2 for engine #2. IGN R is powered by _________ for either engine.
a)
AC transfer bus #1
b)
AC transfer bus #2
c)
AC standby bus
AC standby bus