201-210

Question 1

What light illuminates when both loops in one or both cargo compartments have failed?
a)
DETECTOR FAULT
b)
DISCH
c)
FIRE WARNING LIGHT
b)
DISCH
c)
FIRE WARNING LIGHT

Answer 1

DETECTOR FAULT

Question 2

Pulling the engine fire warning switch up:
a)
closes both the engine fuel shutoff valve and the spar fuel shutoff valve
b)
disables all fuel pumps
c)
deactivates the respective electric hydraulic pump

Answer 2

closes both the engine fuel shutoff valve and the spar fuel shutoff valve

Question 3

During the Extinguisher test, positioning the EXT TEST Switch to 1 and 2 verifies circuit continuity from the squib to:
a)
the two engine fire switches, the APU must be tested separately
b)
both engines and APU fire switches
c)
the duct overheat circuitry

Answer 3

both engines and APU fire switches

Question 4

On the B737-800, after the Cargo Fire System is armed, if the Cargo Fire Discharge (DISCH) Switch is pushed, the first extinguisher bottle is discharged.
a)
A timer is then set for 60 minutes to discharge the second bottle automatically.
b)
The second bottle must be discharged manually after 15 minutes.
c)
The second bottle must be discharged manually after 60 minutes.

Answer 4

A timer is then set for 60 minutes to discharge the second bottle automatically.

Question 5

Pushing the FWD Cargo Fire ARM Switch:
a)
arms the extinguisher for the forward cargo compartment and discharges the first bottle
b)
arms the extinguisher for the forward cargo compartment
c)
arms the extinguisher for both cargo compartments

Answer 5

arms the extinguisher for the forward cargo compartment

Question 6

With the OVHT DET switch selected to A, what does an illuminated amber FAULT light on the overheat fire protection panel indicate?
a)
the A detector loop for an engine has failed
b)
the A circuit continuity has failed for the respective fire extinguisher bottle
c)
the wheel well fire detection system has failed

Answer 6

the A detector loop for an engine has failed

Question 7

Placing the Fault/Inoperative (FAULT/INOP) and Overheat/Fire (OVHT/FIRE) TEST Switch to the FAULT/INOP position:
a)
tests the fault detection circuits for both engines
b)
tests the fault detection circuits for both engines and the APU
c)
tests the fault detection circuits for the APU

Answer 7

tests the fault detection circuits for both engines and the APU

Question 8

If both MASTER CAUTION lights, the OVHT/DET system annunciator light, and the related ENG OVERHEAT light illuminate, what has occurred?
a)
An engine fire loop has failed
b)
An APU overheat
c)
An engine overheat

Answer 8

An engine overheat

Question 9

What does an illuminated engine BOTTLE DISCHARGE light indicate?
a)
the related fire extinguisher bottle has been armed and is ready for discharge
b)
the related fire extinguisher bottle has discharged
c)
there is a fault in the fire protection system and the bottle cannot be discharged

Answer 9

the related fire extinguisher bottle has discharged

Question 10

Should the FAULT light illuminate when the FAULT/INOP and OVHT/FIRE TEST Switch is placed in the OVHT/FIRE position?
a)
Yes
b)
Yes if one of the Wheel Well Loops have failed
c)
No

Answer 10

NO