An illuminated flashing ALIGN Light on the Aft Overhead Panel indicates that alignment cannot be completed due to IRS detection of:
a)
a significant difference between previous and entered positions or an unreasonable present position entry
b)
no present position being entered
c)
all answers are correct
all answers are correct
The _______ light illuminates when a system fault affecting the related IRS ATT and/or NAV modes has been detected.
a)
ALIGN
b)
DC FAIL
c)
FAULT
FAULT
The _______ light illuminates when DC power for the respective IRS is not normal.
a)
ALIGN
b)
DC FAIL
c)
FAULT
DC FAIL
An illuminated amber GPS light indicates:
a)
failure of both GPS sensor units
b)
GPS alignment is occurring
c)
standby GPS operation
failure of both GPS sensor units
An illuminated amber ILS light (as installed) indicates:
a)
ILS alignment is occurring
b)
failure of both ILS sensor units
c)
standby ILS operation
failure of both ILS sensor units
An illuminated amber GLS (as installed) light indicates:
a)
GLS alignment is occurring
b)
failure of both GLS sensor units
c)
standby GLS operation
failure of both GLS sensor units
Placing the transponder selector to 1 selects:
a)
transponder No. 1
b)
transponder No. 2
c)
transponder No. 3
transponder No. 1
The Air Traffic Control (ATC) Code Indicator is shown on the transponder and the code is set via the:
a)
FMC
b)
ROTATE knob
c)
FMC or ROTATE knob
ROTATE knob
Placing the Transponder Mode Selector to ALT RPTG OFF (altitude reporting off):
a)
operates the transponder without altitude reporting
b)
operates the transponder with altitude reporting off until airborne
c)
all answers are correct
operates the transponder without altitude reporting
Placing the Transponder Mode Selector XPNDR (transponder):
a)
operates the transponder in ground mode
b)
operates the transponder with altitude reporting
c)
operates the transponder with altitude reporting off until airborne
operates the transponder with altitude reporting