Pushing the Identification (IDENT) switch on the Transponder Panel:
a)
tests the transponder on the ground
b)
sends an emergency signal
c)
transmits an identification signal
transmits an identification signal
How is a transponder malfunction indicated?
a)
an illuminated transponder (XPNDR) FAIL light on the transponder panel
b)
an illuminated master caution light along with the IRS system annunciator
c)
an illuminated master caution light along with the IRS system annunciator only on recall
an illuminated transponder (XPNDR) FAIL light on the transponder panel
What is the maximum allowed lateral fuel imbalance between tanks 1 and 2?
a)
800 lbs
b)
1000 lbs
c)
1100 lbs
1000 lbs
A displayed (amber) fuel configuration (CONFIG) alert indicates:
a)
center fuel tank quantity is greater than 1600 lbs
b)
either engine running and both center fuel pump switches are positioned to OFF
c)
either engine running and both center fuel pump switches are positioned OFF, and center fuel tank quantity is greater than 1600 lbs
either engine running and both center fuel pump switches are positioned OFF, and center fuel tank quantity is greater than 1600 lbs
An illuminated (amber) fuel FILTER BYPASS light indicates:
a)
the engine is starting
b)
an impending hydraulic filter bypass
c)
an impending fuel filter bypass
an impending fuel filter bypass
An extinguished ENGINE VALVE CLOSED light indicates the related valve is:
a)
in transit
b)
open
c)
closed
Open
An illuminated (blue) ______ SPAR VALVE CLOSED light indicates the valve is closed.
a)
flashing
b)
dim
c)
bright
dim
For ground operation, center tank fuel pump switches must not be positioned _____ unless the center tank fuel quantity exceeds 1000 pounds.
a)
ON
b)
OFF
ON
When main tank fuel pump pressure is low, each engine ________ draw fuel from its corresponding main tank through a suction feed line that bypasses the pumps.
a)
can
b)
cannot
c)
while on the ground only, can
CAN
The center tank pumps produce _______ pressure than the main tank pumps.
a)
lower
b)
higher
higher